Sony XAV-AX5160 Скачать руководство пользователя страница 16

Страница: 16 / 48

Updating the Firmware

To update the firmware, visit the support site on the
back cover, then follow the online instructions.

Note

During the update, do not remove the USB device.

Precautions

• Power antenna (aerial) extends automatically.
• When you transfer ownership or dispose of your

car with the unit installed, initialize all the settings
to the factory settings by performing the factory
reset (page 14).

• Do not splash liquid onto the unit.

Notes on safety

• Comply with your local traffic rules, laws, and

regulations.

• While driving

– Do not watch or operate the unit, as it may lead

to distraction and cause an accident. Park your
car in a safe place to watch or operate the unit.

– Do not use the setup feature or any other

function which could divert your attention from
the road.

– When backing up your car, be sure to look back

and watch the surroundings carefully for your
safety even if the rear camera is connected. Do
not depend on the rear camera exclusively.

• While operating

– Do not insert your hands, fingers, or foreign

objects into the unit as it may cause injury or
damage to the unit.

– Keep small articles out of the reach of children.
– Be sure to fasten seatbelts to avoid injury in the

event of sudden movement of the car.

Notes on LCD panel

• Do not get the LCD panel wet or expose it to

liquids. This may cause a malfunction.

• Do not press down hard on the LCD panel as doing

so can distort the picture or cause a malfunction
(i.e., the picture may become unclear or the LCD
panel may be damaged).

• Do not touch the panel with objects other than

with your finger as it may damage or break the
LCD panel.

• Clean the LCD panel with a dry soft cloth. Do not

use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray.

• Do not use the unit outside the temperature range

0 ºC – 40 ºC (32 ºF – 104 ºF).

• If your car was parked in a cold or hot place, the

picture may not be clear. However, the monitor is
not damaged and the picture will become clear
after the temperature in your car becomes normal.

• Some stationary blue, red, or green dots may

appear on the monitor. These are called “bright
spots” and can happen with any LCD. The LCD
panel is precision-manufactured with more than
99.99% of its segments functional. However, it is
possible that a small percentage (typically 0.01%)
of the segments may not light up properly. This
will not, however, interfere with your viewing.

Notes on the touch screen

• This unit uses a capacitive touch screen. Touch the

screen directly with your fingertip.

• Multi-touch operation is not supported on this

unit.

• Do not touch the screen with sharp objects such

as a needle, pen, or fingernail. Operation with a
stylus is not supported on this unit.

• Touching the screen with a gloved finger may cause

the unit to operate incorrectly or not respond.

• Do not let any objects contact the touch screen. If

the screen is touched by an object other than your
fingertip, the unit may not respond correctly.

• Since glass material is used for the screen, do not