7
EN
To locate the succeeding tracks
To locate the preceding tracks
Playing a tape recorded in the
Dolby
*
B NR system
Press
(3)
when you want to listen to a
tape recorded in the Dolby
*
B NR system.
“
a
” appears on the display.
To cancel this mode, press
(3)
again.
*
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
a
are trademarks
of Dolby Laboratories Licensing Corporation.
Playing a CrO
2
or metal tape
Press
(4)
when you want to listen to a
CrO
2
(TYPE II) or metal (TYPE IV) tape.
“MTL” appears on the display.
To cancel this mode, press
(4)
again.
Switching to the radio while fast-
winding a tape
— Automatic Tuner Activation (ATA)
Press
(5)
during playback.
“ATA” appears on the display.
When fast-forwarding or rewinding with
(SEEK/AMS)
for two seconds, the tuner turns
on automatically.
To cancel this mode, press
(5)
again.
Skipping blanks during tape
playback
— Blank skip
Press
(6)
during playback.
“BL.SKIP” appears on the display.
Blanks longer than eight seconds are
automatically skipped during tape playback.
To cancel this mode, press
(6)
again.
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS)
momentarily.
Note
The AMS function may not work when :
• the blanks between tracks are shorter than 4 seconds
• there is noise between tracks
• there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press
(DSPL)
during tape
playback, the display changes as follows:
z
Tape playback
z
Clock
z
Frequency
*
*
While the ATA function is activated.
Playing a tape in various
modes
Searching for the desired track
— Intro scan
Press
(1)
during playback.
“INTRO” appears on the display.
The first 10 seconds of all tracks are played.
When you find the desired track, press
(1)
again. The unit returns to the normal playback
mode.
Playing tracks repeatedly
— Repeat play
Press
(2)
during playback.
“REPEAT” appears on the display.
When the current track is over, the tape
rewinds to the beginning of the track and
plays it again.
To cancel this mode, press
(2)
again.
CD Player/Cassette Player
SEEK/AMS
