10
EN
Changing the sound and
beep tone
Boosting the bass sound
— D-Bass
You can enjoy clear and powerful bass sounds.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-bass control. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass
*
function creates
even sharper and more powerful bass sounds
than Analog D-bass.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS”
*
appears on the display.
To cancel, turn the control to the OFF position.
*
If an optional CD changer has the Digital D-BASS
function, “DIGITAL D-BASS” appears on the display
during CD playback.
Note
The bass sound may distort at same volume. If the bass
sound distorts, adjust the D-BASS dial or volume control.
Muting the beep tone
Press
(6)
while pressing
(SOUND)
.
To obtain the beep tone again, press these
buttons once more.
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Digital D-BASS
Analog D-BASS
Level
Level
Frequency (Hz)
Frequency (Hz)
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
If you need to mount the rotary remote on the
right side of the steering column, you can
reverse the control's operative direction.
Press
(SOUND)
for two seconds while
pushing in the VOL control.
Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing
(SOUND)
repeatedly.
VOL (volume)
n
BAS (bass)
n
TRE
(treble)
n
BAL (balance)
n
FAD (fader)
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control.)
To increase
To decrease
