20
GB
When the car without ACC position
After matching the connections and switching
power supply leads correctly, connect the unit to
the car’s power supply. If you have any questions
and problems connecting your unit that are not
covered in this manual, consult the car dealer.
1
To enable the wired remote control, set
[STR CONTROL] in [SET STEERING] to
[PRESET] (page 10).
Installation
Before installing the unit, remove the bracket
from the unit.
1
Insert both release keys
until they
click, and pull down the bracket
, then
pull up the unit to separate.
When mounting in a Japanese car, see “Mounting
the unit in a Japanese car” (page 21).
Mounting the unit with the supplied
bracket
Before installing, make sure the catches on both
sides of the bracket
are bent inwards 3.5 mm
(
5
/
32
in).
1
Position the bracket
inside the
dashboard, then bend the claws outward
for a tight fit.
Using the wired remote control
Red
Red
Yellow
Yellow
Removing the bracket
Mounting the unit in the dashboard
Face the hook inwards.
Larger than
182 mm (7
1
/
4
in)
Larger than
111 mm
(4
3
/
8
in)
Catch
