Sony WLL-RX55, Руководство по обслуживанию

Страница: 15 / 230

1-7 (E)
WLL-RX55
1
B3 x 6
2
B3
x
6
3
B3
x
6
4
B3 x 6
5
B3 x 6
Rear assembly
Wiring stoppers
Do not attempt to
remove by pulling
the cable.
NG Hold the plug to
remove. OK
4. Reattach the rear assembly in the reverse order of
removal.
m
.
When connecting the coaxial cable, hold the plug
and connect the coaxial cable to the connector
vertically.
Press the plug into the connector by small turning to
the left and the right.
. Bind again the cables and the harnesses that were
originally bound with a wiring stopper.
.
When reattaching the rear assembly, tighten the five
screws sequentially in accordance with the figure.
3. Disconnect all the harnesses and flexible card wires
from the rear assembly as shown in the figure.
m
.
When disconnecting the coaxial cable, do not
attempt to remove by pulling the cable. Be sure to
hold the plug to remove.
.
Be careful not to bend the flexible card wires. This
shortens the wire life.
Connecting connector
Hold the plug to connect