Sony WEGAKE-MX37, Руководство по эксплуатации

Страница: 85 / 108

85
Adjusting Your Setup (MENU)
Adjusting Y
our Setup (MENU)
Select To
“Channel Setup” preset channels.
M o v e : S e l e c t : E n d :
C a b l e : Of f
A u t o P r o g r a m
C h a n n e l S k i p / A d d
C h a n n e l L a b e l
C h a n n e l B l o c k
C h a n n e l S e t u p
You can select automatic or manual channel presetting.
See “Presetting channels manually” on page 86.
For “Channel Label” and “Channel Block”, see “Assigning labels
to the preset channels” on page 88 and “Blocking channels” on
page 89, respectively.
“Video Label” assign labels to the connected audio/video equipment.
M o v e : S e l e c t : E n d :
V i d e o L a b e l
V i d e o I n p u t :
L a b e l : V i d e o 1
V i d e o 1
See “Assigning labels to the connected audio/video equipment”
on page 90.
“Color System” select the color system. Normally, set this to “Auto”.
You can select the color system for each video input.
The color system for TV channels is fixed.
“S Input” select the S video input mode.
Press
M / m to select “Auto” to receive the S video signal
automatically when the signals are input through both the S
VIDEO (S video input) and VIDEO (video input) jacks of the
same video input channel, then press .
To deactivate the S video input, select “Off”, then press .
“Speaker Phase” select the phase of sound when using the TV’s speakers as the
center speaker. If sound from the TV’s speaker (as center speaker)
sound unnatural, change the phase of sound.
Select “Normal” or “Reverse”.
Note
• “Language” selection is disabled when the “Memory Stick” viewer is
displayed.
To return to the normal screen
Press MENU.
continued