Sony WEGA KV-32XBR450, Руководство по обслуживанию

Страница: 16 / 31

KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H
— 32 —
Control Register
Function & Link
Data
Type
Data
Range
Comment
Full Vcomp1 Vcomp2
0 VPOS V_POSITION: Vertical position (V_DRV siganl DC-bias) Adj. 0~(31)~63
1 VSIZ V_SIZE: Vertical size (V_DRV signal gain) Adj. 0~(31)~63
2 VLIN
V_LINEARITY: Vertical linearity
(Gain for V_DRV signal secondary component)
Adj. 0~(7)~15
3 VSCO S_CORRECTION: Vertical S-correction Adj. 0~(7)~15
4
VCEN
VSAW0_DCH/VSAW0_DCL: Vertical center adjustment
VSAW0_DCH: VSAW0 waveform DC component (high 2-bits)
VSAW0_DCL: VSAW0 waveform DC component (low 4-bits)
Adj. 0~(31)~63
VCEN-L(Low bit)
VCEN-H(High bit)
5
VPIN
VSAW0_AMP: Vertical PIN adjustment
VSAW0 waveform SAW component amplitude
Adj. 0~(15)~31 15 [15]
[Copy1]: Copy the adjusted data
for Full mode.
6 NSCO VSAW1_DC: Rotation Adj. 0~(7)~15
7 HTPZ VSAW1_AMP: Horizontal trapezoid Adj. 0~(15)~31
8 ZOOM ZOOM_SW: Zoom switch 0, 1 0
9 APSW ASP_SW: Aspect switch 0, 1 1 1 0
10 ASPT V_ASPECT: Aspect ratio Adj. 0~63 47 47 47
11 SCRL V_SCROLL: Vertical scroll Adj. 0~(31)~63 31 32 32
12 UVLN UP_VLIN: Upper vertical linearity 0~15 0
13 LVLN LO_VLIN: Lower vertical linearity 0~15 0
Full: 480p/960i (4x3) display
Vcomp1: 480p/960i (16x9) display
Vcomp2: 1080i (16x9) display
Adj.: Adjusted data
( ): Settings at center
Data Initial Settings & [Average Data]
(
32V&36V CRTs)
Register
No & Name
26 [26]
0
9 [9]
31 [31]
15 [15]
8 [8]
Either 7 or 8 can be used as the
average NSCO data.
(If both of them are not good,
please feedback to / check with
the DY attachment process.)
19 [19]
0
0
Note:
The same CXA2150 service data is used for DX1A-2001&2000.
DX1A-2001&2000 SERVICE LIST (#4-1):
CXA2150D-1 {Deflection Controls: D1}
7 [7]
Device Name: CXA2150AQ { CRT Driver / SONY } / IC201 (A-board) / P/N: 8-752-093-35 (SBorSD#: NA)
Slave Address: 86h
15 [Copty1]