Sony WALKMAN NW-ZX505 Скачать руководство пользователя страница 32

Страница: 32 / 64

NW-ZX505/ZX507

Sony CONFIDENTIAL

For Authorized Servicer

2-9. LITHIUM ION STORAGE BATTERY-2

• Continued on 2-10 (page 33).

tape

tesa

(ASC)

Note 1:

Adhesive sheet fixing the built-in lithium ion storage

battery can be removed using a jig.

Therefore, even if the adhesive sheet is peeled from

the built-in lithium ion storage battery, the built-in

lithium ion storage battery can be reused.

In case of the lithium ion storage battery are damaged

during the process of peeling the adhesive sheet, such

as scratches or exterior swelled etc. on the lithium ion

storage battery, the lithium ion storage battery cannot

be reused. In that case, be sure to replace the new parts.

top side

front side

bottom side

adhesive sheet (battery)

lithium ion
storage battery

Detouch Supporter

Note 2:

Check both sides (side with text)

of the Detouch Supporter.

Push down the Detouch

Supporter from the top.

Wind the tip of the adhesive sheet (battery)

around a ballpoint pen, etc.

Note

Make sure to wind the adhesive sheet

(battery) from the bottom to top.

(The winding direction is important)

Use the Detouch Supporter as a support point, and

wind the adhesive sheet (battery) slowly and carefully.

Note

Take care so that the adhesive sheet (battery) does not tear

midway. If the adhesive sheet (battery) is torn midway and

remains under the lithium ion storage battery, the adhesive

sheet cannot be peeled off exclusively.

Note 5:

As you slowly wind the adhesive

sheet (battery) so that it does not

tear midway, it gradually becomes

narrower.

Wind until the adhesive sheet (battery)

is completely peeled off.

Detouch Supporter

Check the method of obtaining
this jig to the each service
headquarters.

side with text

Note 7:

The removed adhesive sheet (battery) cannot be reused.

Make sure to replace it with a new one.

Ballpoint pen, etc.

Peel off the adhesive sheet (battery)

in the direction of the arrow.

Note

Carefully peel off so that the lithium ion

storage battery does not get damaged.

Detouch Supporter
(side with text)

adhesive sheet (battery)

– Bottom view –

lithium ion
storage battery

No gap.

Detouch
Supporter

Insert the Detouch Supporter between the lithium

ion storage battery and adhesive sheet (battery).

Note

Hold the Detouch Supporter close to

the lithium ion storage battery.

– Side view –

SYS SET

2019/12/13 00:24:41 (GMT+09:00)

Содержание WALKMAN NW-ZX505

































































Результаты поиска

Содержание WALKMAN NW-ZX505

Отзывы:

Бренды по названию

Популярные бренды

Sony WALKMAN NW-ZX505, Руководство по обслуживанию

Результаты поиска

Содержание WALKMAN NW-ZX505

Отзывы:

Бренды по названию

Популярные бренды