background image

28

Function Menu

The Function menu is used for changing the settings of the various functions of the unit.

Setting items

Description

3D Settings

You can change the settings of the 3D function.

2D-3D Display Sel.

For Switching the video images to “2D” or “3D.”

Auto:

 Displays 3D video images when HDMI signals with 3D information* are input. Displays 2D 

video images when other signals are input.

3D:

 Displays 3D video images according to the 3D system selected in “3D Format.” However, when 

HDMI signals with 3D information are input to the unit, displays 3D video images according to the 3D 
system of those HDMI signals.

3D Format:

 Set the 3D system when the input HDMI signals do not include 3D information.

Simulated 3D:

 Converts 2D video images to 3D video images. The setting can be made only for input 

the HD signals.
The simulated 3D feature may have limited effect, depending on the video source.
There are differences in perception of 3D video images among individuals.

Side-by-Side:

 Select this to display 3D images as two similar images, side-by-side.

Over-Under:

 Select this to display 3D images as two similar images, one above the other.

Tips

• “2D-3D Display Sel.” cannot be set to “3D” for some video sources. For available 3D signals, see 

“Compatible 3D Signals” (page 44).

• The simulated 3D feature may have limited effect, depending on the screen size (100 to 120 inches 

recommended) and the video source.

• The menu display has a ghost while a 3D video image is displayed and is best viewed with the 3D 

glasses.

3D Brightness

For adjusting the brightness of the picture when watching 3D video images. 
You can select the brightness from “High” or “Standard.”

3D Depth Adjust

For adjusting the depth of the 3D video images on the projection surface. The setting can be made only 
when a 3D Format other than “Simulated 3D” is selected.

We recommend that “3D Depth Adjust” be set to “0.” The 3D video images may be difficult to perceive, 
depending on the setting of “3D Depth Adjust.”

Simulated 3D Effect

For adjusting the 3D effect when 2D content is converted to 3D video images. You can select the effect 
from among “High,” “Middle,” and “Low.”

Tip

There are differences in perception of 3D video images converted by the simulated 3D function among 
individuals.

Dynamic Range

Sets the video input level for HDMI 1 and HDMI 2 connectors.

Auto:

 Sets the video input level automatically.

Limited:

 The video input level is set for signals that are equivalent to 16-235.

Full:

 The video input level is set for signals that are equivalent to 0-255.

If the video output setting of the connected HDMI device is not set correctly, light and dark parts of the 
video may appear too light or too dark.

Depth

Normal

Front

Depth

Note

Содержание VPL-VW5000ES






















































Отзывы: