Sony VPL-FHZ101, Руководство по эксплуатации

Страница: 52 / 64

52
6
Replace the air filter and attach the filter
holder.
When attaching the filter holder, first insert
the two tabs on the left, insert the three tabs
on the right, and tighten the three screws.
7
Insert the tabs on the filter cover and slide the
filter cover upward.
Be sure to attach the air filter firmly; the power cannot be
turned on if it is not attached securely.
Updating the Software
To update the software of the unit, download files
for update to your computer. Copy the
downloaded files to your USB memory and insert
the USB memory to the USB port of the unit.
You are required to prepare a USB memory device,
and the environment that your computer can be
connected to the Internet and update files can be
written on the USB memory.
The update files can be downloaded from the
Sony website.
For details, refer to the following website.
https://pro.sony.com
https://www.sony.jp/vpl/ (Access from Japan)
To update the software of the unit via the network,
connect the computer to the LAN that the
projector is connected to.
The update files can be downloaded from the
Sony website.
For details, refer to the website or “Using the
Software Update Function” on page 45.
https://pro.sony.com
https://www.sony.jp/vpl/ (Access from Japan)
 USB 2.0 memory device up to 8 GB is available for the
projector. However, all the USB memory devices are not
guaranteed for use on the projector.
When you format the USB memory, make sure to do so
with a FAT32 file system. If you format the USB memory
with a file system other than FAT32, you cannot use the
USB memory for the projector.
 Some USB memory devices may not be supported. For
details, refer to the above website.
 Depending on the environment, it may take about
80 minutes to update.
 Do not unplug the power cable while updating the
software.
Note
Tabs
Tabs
Tabs
Updating the Software via the USB Memory
Updating the Software via the Network
Notes