27
VPL-EW130
(2) [Power status inquiry] POWR?
This command obtains the projector’s power status.
The projector responds as follows:
Returns the following values when the power status is obtained:
Standby or power-saving state :
Returns “0”.
Power ON state :
Returns “1”.
Cooling state, or cooling state during power-saving state : Returns “2”.
Startup state :
Returns “3”.
Projector error occurring (including warning) :
Returns “ERR4”.
(3) [Input switch command] INPT
This command switches the projector’s inputs.
The available parameter examples are as follows: (The input channel varies depending on the model.)
Parameter 21 : Projector input
Video
Parameter 22 : Projector input
S-Video
Parameter 31 : Projector input
Input A
Parameter 32 : Projector input
Input B
Parameter 33 : Projector input
Input C
Parameter 34 : Projector input
Input D
Parameter 35 : Projector input
Input E
Parameter 36 : Projector input
Input F
Parameter 41 : Projector input
USB
Parameter 51 : Projector input
Network
The projector responds as follows:
When processed properly :
Returns “OK”.
When inexistent input is speci
fi
ed :
Returns “ERR2”.
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) :
Returns “ERR4”.
Содержание VPL-EW130
Страница 1: ...PROTOCOL MANUAL 1st Edition Revised 1 DATA PROJECTOR VPL EW130 VPL SX125 VPL SW125 ...
Страница 4: ......
Страница 36: ......
