Sony VPL-EW130, Руководство по протоколу

Страница: 25 / 38

21
VPL-EW130
(1) Item Error
This error occurs when the Item No. of a request is illegal or its data is illegal. The conditions for occur-
rence of the respective errors are shown below.
Invalid Item
An unsupported Item No. is speci fi ed.
Example 1: The unsupported category A**h is speci fi ed.
Example 2: The unsupported Item No. 8010h is speci fi ed.
Invalid Item Request
The Item No. is supported but an unsupported Request is sent.
Example: An attempt is made to set data in the Model Name (8001h).
Invalid Length
Data length of the speci fi ed Item No. is too long.
Example: An attempt is made to set 25 bytes data in the installation location (8003h).
Invalid Data
Data of the speci fi ed Item No. is outside the setting range.
Example: An attempt is made to set 101 in the Item when the setting range of the Item is 1 to 100.
Short Data
The length of data is shorter than the value speci fi ed by the data length.
Example: The actual data length is nine bytes but the speci fi ed value is 10.
Not Applicable Item
An item that is not valid at present is speci fi ed.
Example: The item to switch the display is speci fi ed when the main power is off.
(2) Community Error
This error occurs when community is different.
Example: “ABCD” is speci
fi ed when “SONY” is set.