Sony VGC-RA718G, Быстрый старт

Страница: 31 / 262

Connecting the Telephone and Modem Cables
Your computer is equipped with a single modem line jack to connect the supplied modem cable to your telephone wall jack.
To use your wall jack for your telephone and modem lines, purchase a "1-to-2" jack adapter device (splitter).
To connect the modem cable
1.
Unplug your telephone from the wall jack.
2. Plug the modem cable (supplied) into the modem line jack located on the back panel of your computer
3. Plug the other end of the modem cable into the wall jack.
To connect the telephone and modem cables
1. Unplug your telephone cable from the wall jack.
2. Insert the telephone cable into one of the RJ-11 jacks on an optional "1-to-2" jack adapter device (splitter).
3.
Insert one end of the modem cable (supplied) into the other RJ-11 jack on the splitter device.
4.
Insert the plug end of the splitter device into the wall jack.
5.
Plug the modem cable into the modem line jack located on the back panel of the computer.
To connect the telephone and m odem cables
Your computer has a protective sticker covering the Ethernet port located on the rear panel. Connect
10BASE-T, 100BASE-TX, or 1000BASE-TX cables to the Ethernet port, depending on your computer's Ethernet port
specification. Using incorrect cables or a telephone cable may result in an electric current overload that can cause a
malfunction, excessive heat, or fire in the Ethernet port. For help on connecting to a network, see your network
administrator.
Page 31