Using an Analog Device for Video Playback
You can stream video content from an analog device, such as a VCR, using the VAIO Media TV server software, and watch
video playback on your computer or across the network.
To set up an analog device
1.
Connect one end of the A/V cable to the Video Out port on your analog device.
2.
Connect the other end of the A/V cable to the Composite Video In jacks, located on the front or back of your
computer equipped with Media Center.
3.
Begin playback using the analog device.
4.
On your computer, click
Start
and point to
All Programs
.
5.
Point to
VAIO Media
, and then click
VAIO Media
.
6.
Click
TV
. One of the following windows appears:
If there are other TV servers that can stream analog input on your network, VAIO Media software
displays them on the server list. Click to select the computer equipped with Media Center from the server
list.
If your computer is the only TV server on the network that can stream analog input, then playback
begins.
Playback
If the playback window is empty, click
Select Channel
. VAIO Media software assigns a channel to each
A/V input jack. You may need to change the channel to view the video.
The
Channel list
window appears.
Channel list
Page 212
Содержание VAIO VGC-RA842G
Страница 11: ...Page 11 ...
Страница 141: ...3 Press OK to play your selection Page 141 ...
Страница 164: ...The new playlist appears Page 164 ...
Страница 185: ... Video Setup with Windows Media Center PCs Page 185 ...