Sony UP-D898MD, Инструкция по эксплуатации

Страница: 16 / 31

Op
er
at
ion
Adjustments and Settings Using the Menu
16
Menu List
This section describes the menus displayed as you operate the menu lever. The setting surrounded by
indicates the default setting.
Item Function Settings
HISTORY Displays up to five recently
used menus according to the
menu operation history. “NO
ITEM” is displayed as the
default.
PRT.HELP Prints description of
operation method. (English
only) -LIST Prints list of operating instructions.
-HELP.1 Prints instructions of “Contrast and Brightness Control.”
-HELP.2 Prints instructions of “Print direction and feed control.”
ADJUST Displays menu for adjusting
image quality. -BRIGHT Adjusts brightness of printouts.
You can set between –64 --
[0]
-- +64.
-CONTRA Adjusts contrast of printouts.
You can set between –64 --
[0]
-- +64.
-GAMMA Select the type of gamma.
When “P.TYPE:S” of the “-PP.TYPE” is selected, GAMA: 1 is fixed.
GAMA4: Softest gradation
GAMA3: Hard gradation
[GAMA2]
: Standard
GAMA1: Soft gradation
-SHARP Adjusts the sharpness of the printout to any of 15 levels, from
[0]
to 14.
The outline of the printout is most emphasized at the setting of 14 and no
emphasis at the setting of “0” (default value).
-TONE Adjusts density of the half tone.
You can set between –32 --
[0]
-- +32.
DIGITAL Displays menu of settings to
print from computer. -DRIVER Select the printer driver to use for this unit.
[DRV:898]
: Use the driver for UP-X898MD, UP-D898MD.
DRV:897: Use the driver for UP-D897.
-RESIZE Select whether or not the image is enlarged.
[RSIZ:OFF]
: Prints the image at its original size.
RSIZ:ON: Prints the image at a larger size, according to the paper size set
by the printer driver.
PRT.MENU Prints current settings by
menu list. MENU:OK Prints by pushing the menu lever.
PREF. Displays menu to set printout
conditions. -BACWRD
a)
Select whether the top or bottom of the screen is to be printed first.
BACW:ON: Starts to print in the reverse direction (from the top of the
screen).
[BACW:OFF]
: Starts to print in the normal direction (from the bottom of
the screen).
-INFO Select whether the print conditions are to be printed under image.
[INFO:OFF]
: Does not print information.
INFO:ADJ: Prints image quality adjustment value.
-INVERT Set the printout to either positive printout or negative printout.
INV:NEG: Makes negative printouts.
[INV:POS]
: Makes normal printouts.
-MIRROR Prints image inverting right and left.
MIRR:ON: Inverts right and left of image.
[MIRR:OFF]
: Does not invert image.
-QTY Set the print quantity.
QTY:
[1]
-- 10: You can make 1 -- 10 copies of the same printout.
CLEAN.TH Starts head cleaning. CLEAN:OK Starts the head cleaning by pushing the menu lever.