Sony UP-D895, Инструкция по эксплуатации

Страница: 22 / 58

Ge
ttin
g St
ar
te
d
Installing the Printer Driver / Setting the DIP Switches
6
Installing the Printer
Driver
Install the printer driver provided with the printer. For
detailed instructions about how to install the printer
driver, refer to the Readme.txt file on the printer driver
installer disk.
Setting the DIP Switches
Set the DIP switches for how you intend to use the
printer. To change the DIP switches, first switch off the
printer and then use a small screwdriver with a small
point to move the switches.
The factory settings are shown below.
DIP SW FUNCTION TABLE
A B
GAMMA switch
Switches the screen tone. This setting is enabled
only after
D
COMMAND is set OFF to select
D890.
When TONE I is selected for GAMMA, the
B
GAMMA switch can be at either position, but we
recommend leaving the switch at the ON position
(factory setting).
No. Function ON OFF
1
GAMMA
——— TONE I
2 TONE III TONE II
3 RESIZE TO FIT ON OFF
4 COMMAND D895 D890
5 POST FEED ON OFF
6 RESERVED ——— ———
7 RESERVED ——— ———
8 RESERVED ——— ———
Print Mode GAMMA Switch Position
A B
TONE I OFF (TONE 1) Enabled for either
TONE II ON (-) OFF (TONE II)
TONE III ON (-) ON (TONE III)
DIP SW
OFF
ON
AC IN
DIP SW
USB
OFF
ON
DIP SW FUNCTION TABLE
NO FUNCTION SW-ON SW-OFF
1
2
3
4
5
6
7
8
GAMMA
RESIZE TO FIT
COMMAND
POST FEED
RESERVED
RESERVED
RESERVED
TONE
TONE TONE
OFF
D895 D890
ON
ON
OFF