manualshive.com logo in svg

Sony UP-D2600, Руководство по обслуживанию

Поделиться
Скачать
Sony UP-D2600 Скачать руководство пользователя страница 129

6-3

UP-D2600/V1(E)

6-2. Mechanism Troubleshooting

The three main troubles of the printer mechanism deck are as follows.

.

Paper feed troubles such as miss-feeding, double-feeding, etc.

.

Paper ejection troubles such as jamming which occur after printing

.

Printing troubles from printing results

The following describes how to first locate the area with the troubles and how to solve the troubles

smoothly.

1. Paper Feed Troubles

Location: Paper supply block assembly

Chuck trouble occurs because the paper has not reached the platen.  The possible causes

are the paper cannot be fed properly due to the wear of the paper feed rubber or the platen
cannot chuck the paper due to damage of parts.

Moreover, the paper may not be able to be chucked to the platen due to the dust adhering
to the roller or paper.  Therefore, check that the roller cleaning or roller is normal.

If paper is double-fed, check the torque limiter and separation roller.

Location: Paper supply tray assembly

The paper cannot be fed even though the paper feed block assembly and paper supply

lever are working normally.
This is because the paper is not being fed from the paper supply tray.

The possible causes are the deformation of the claw of the paper supply tray or the paper
is bent when the paper is set to the tray.

2. Paper Ejection Troubles

Location : Platen cover assembly

After completing printing, paper ejection is carried out, but the paper is not ejected.  Paper
is jammed at the top of the platen.

This paper ejection trouble is caused by the damage of paper holding parts of the platen
cover (upper cover which can be opened and closed for reparing paper jamming).

Location : Paper supply block assembly

Paper jams near the paper ejection exit and not on top of the platen.
This may occur when the paper ejection flap attached to the paper feed block assembly

drops or when the support portion is damaged.
The paper is not normally chucked to the platen during paper feeding when the paper is

jammed during ejection because it moved obliquely.  Therefore, check each item of paper
feed troubles.

Содержание UP-D2600





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды