Op
er
at
ion
Adjustments and Settings Using the Menu
46
Menu List
This section describes the menus displayed as you turn
the jog dial. The setting surrounded by
indicates the factory setting.
Item
Function
Settings
AGC
To adjust the
input signal to the
optimum printing
level
AG:ON: Adjusts the input
signal to the optimum level,
when the printout image
appears too dark or too
light.
[AG:OFF]
: Normally select
this setting.
BACK: Cancels the setting
change and returns to the
item selection column.
ASPCT
a)
To select the
aspect ratio
AS:1:1: Prints a video
signal with an aspect ratio
of 1:1.
[AS: 4:3]
: Normally select
this setting.
BACK: Cancels the setting
change and returns to the
item selection column
BEEP
To select whether
the operation and
error tones sound
BE: OFF: The operation
tone does not sound.
[BE: ON]
: The operation
and error tones sound.
BACK: Cancels the setting
change and returns to the
item selection column.
CLEAN
To start head
cleaning
[CL: OK]
: Starts the head
cleaning. Be sure to use the
supplied cleaning sheet.
BACK: Cancels the head
cleaning and returns to the
item selection column.
COLOR
To select the
input signal to be
printed
CO:ON: Prints the color
signal.
[CO:OFF]
: Prints the black
and white signal.
BACK: Cancels the setting
change and returns to the
item selection column.
DIR
b)
To select whether
the top or bottom
of the screen is to
be printed first
DI: REV: Starts to print in
the reverse direction (from
the top of the screen).
[DI: NOR]
: Starts to print in
the normal direction (from
the bottom of the screen).
BACK: Cancels the setting
change and returns to the
item selection column.
FEED
To select the
paper feed
method to be used
after printing
FE: OFF: Feeds less paper
between prints to conserve
paper, or when printing
multiple pictures on the
same sheet. More pictures
can be printed on one sheet,
but because there is so little
space between printed
pictures, you must press the
FEED button before cutting
the paper.
[FE: ON]
: Feeds extra blank
paper between prints.
BACK: Cancels the setting
change and returns to the
item selection column.
GAMMA
(When the
“ME:S” is
selected in
“MEDIA” is
selected,
GAMMA is
fixed to
TONE 1.)
To select the tone
of the printouts
(density
gradation)
GA:4: TONE 4 Softest
gradation
GA:3: TONE 3 Hard
gradation
[GA:2]
: TONE 2 Standard
GA:1: TONE 1 Soft
gradation
BACK: Cancels the setting
change and returns to the
item selection column.
IMAGE
To set the printout
to either positive
printout or
negative printout
IM:NEG: Makes negative
printouts.
[IM:POS]
: Makes normal
printouts.
BACK: Cancels the setting
change and returns to the
item selection column.
INFO
To select whether
or not the print
conditions (such
as contrast,
brightness,
gammas and
sharpness
information) are
printed under the
image
IF:ON: Prints the
information.
[IF:OFF]
: Does not print the
information.
BACK: Cancels the setting
change and returns to the
item selection column.
INTRT
To change the
operation of
printing
interruption
IN:ON: Stops printing by
pressing the PRINT button
during printing and prints a
new image captured at
instant you pressed the
PRINT button.
[IN:OFF]: Does not stop
printing even if the PRINT
button is pressed. After
completing the current
printing, the unit prints the
image captured at instant
you pressed the PRINT
button.
BACK: Cancels the setting
change and returns to the
item selection column.
Item
Function
Settings
Содержание UP-897MD
