background image

Additional Information

23

Possible cause

Symptom

Solutions

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Press A/B until a better sound is heard.

• Press SELECT until “PIC ROTATION”

appears on the screen, then press + or –
to align the picture to the TV screen.

• Use the fine tuning (FINE) function.

• Contact your nearest Sony service center.

Page

4

18

12

10

20

Stereo broadcast

sound switches on

and off or is distorted.

or

The sound switches

between monaural

and stereo frequently.

(KV-XG29M90 only)

Picture slant

Lines moving across

the TV screen.

The 

u

 indicator on

your TV flashes red

a number of times

between 3-second

intervals.

TV cabinet creaks.

A “boom” sound is

heard when the TV

is turned on.

• Connection is loose or

the cable is damaged.

• The antenna direction

is inappropriate.

• Broadcast signal has a

transmission problem.

• The terrestrial

magnetism affects
your TV set.

• There is interference

from external sources,
e.g., heavy machineries,
nearby broadcast
station.

• Your TV may need

service.

• Changes in room

temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.

• The TV’s demagnetizing

function is working.
This does not indicate a
malfunction.

Содержание Trinitron KV-XG29



























Отзывы: