– 15 –
KV-DA322M64/M66
RM-GA001
SECTION 6
CIRCUIT ADJUSTMENTS
6-1.
ADJUSTMENTS WITH COMMANDER
Service adjustments to this model can be performed using the supplied remote commander RM-GA001.
a. ENTERING SERVICE MODE
With the unit on standby
This operation sequence puts the unit into service mode.
This screen display is:
b. METHOD OF CANCELLATION FROM SERVICE MODE
Set the standby condition (Press
[POWER]
button on the commander), then press
[POWER]
button again, hereupon it becomes
TV mode.
c. METHOD OF WRITE INTO MEMORY
1. Set to Service Mode.
2. Press
1
(UP) and
4
(DOWN), to select the adjustment item.
3. Change item by pressing
3
,
6
.
4. Press
[MUTING]
button to indicate WRITE on the screen.
5. Press
-
button to write into memory.
item no.
service data
NVM
service
field
channel no./
category
in decimal
item name
in decimal
NG
command
frequency
video input name
WHBL
000
WBP
000
x
SERVICE
50
S VIDEO 1
software
service data
reserved
power on time
release ID
version
in binary
for factory
color system
(decimal)
CGA01
0.16M
0000 0000
FF FF
NTSC3
00100
S_ _
: for SONY
A_ _
: for AIWA
L_ _
: BX1L Full
B_ _
: BX1L Basic
D_ _
: DVD Combo
C_ _
: CX1
Z_ _
: Sound special
_ _ _01 : Serial no. of the M/P release for each
destination
_ _ _10 ~: use for FY04 BX1
_ _SB
: Sub Hercules
t
[DISPLAY]
t
5
t
[VOL $+% ]
t
[POWER]
1
,
4
Select the adjustment item.
r
3
,
6
Raise/lower the data value.
r
[MUTING]
Writes.
r
-
Executes the writing.
For BP1 Board Version; and PF Engine Version;
Category and release ID will be different.
The rest are the same.
BP1 Board Version
item no.
item
category
in decimal
name
SUBP
000
IDXH
software
release ID
version
CBP01
0.06
PF Engine Version
item no.
item
category
in decimal
name
9090
000
UOF
software
release ID
version
PF 0018M
