Sony SVT-RA168, Руководство по обслуживанию

Страница: 42 / 100

2-26
SVT-RA40/RA168
3-13-3. S Brake Act Slide and BT Spring
Lever Assembly
1. Refer to Section 3-16 and remove the crescent slide.
2. Refer to Section 3-12-1 and remove the friction gear
assembly.
3. Slide the S brake act slide
1
in the direction of the
arrow
A
, then remove it.
4. Refer to Section 3-11 and remove the BT spring.
5. Remove the sub BT spring
2
.
6. Press the BT spring lever assembly
3
until it touches
the pin
4
, then remove it.
Assembly Notes:
1. Apply grease (VHJ-0100) to the shaft
5
shown in
Fig. 3-13-3, and to the BT spring lever assembly
3
and the S brake act slide
1
shown in Fig. 3-13-4.
2. After mounting the BT spring lever assembly
3
on
the Shaft
5
, hook the BT spring onto the clamp
6
and press it until it touches the pin
7
.
3. Make sure that the clamps
8
,
9
and
0
have
snapped into the S brake act slide
1
. Align the arrow
!-
on the S brake act slide
1
with the arrow
!=
on
the mechanism chassis.
!-
Arrow
5
Shaft
!=
Arrow on
mechanism chassis
1
S brake act
slide
3
BT spring
lever
assembly 2
Sub BT
spring
6
Clamp
7
Pin
4
Pin
9
Clamp
0
Clamp
8
Clamp
Fig. 3-13-3
Fig. 3-13-4
Apply grease
Apply grease
Apply
grease
3
BT spring
lever
assembly
1
S brake
act slide