7
VPL-PX35/PX40/FX51
3-1-2. Remote Control
The remote control service is provided that can control the target equipment from remote location via
network. The SDCP protocol that serves to acquire the basic information such as equipment name and
serial numbers is installed in this projector.
3-1-2-1. Function
This responds to the control command and requests for acquiring the status and information supplied
from clients.
Control request
Enables the input to be selected and picture control to be adjusted.
SIRCS request
Enables remote control by sending the SIRCS code.
Status request
Enables equipment status information such as power status, error information and power-on time to be
acquired.
Information request
Enables equipment information such as equipment name, serial number and installation information to be
acquired.
Protocol
Item
Description
Protocol name
SDCP (Simple Display Control Protocol)
Transport
TCP
Port number
53484
TCP connection timeout
30 seconds
3-1-2-2. Setup Items
The items that can be set for the remote control service are described below.
Setup item
Description
Port
Port number
Timeout
TCP connection timeout time
