background image

28

US

D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\030CON.fm

masterpage: Left

STR-DA3500ES
4-144-907-

11

(1)

Notes on connecting cables

• Use a High Speed HDMI cable. If you use a 

Standard HDMI cable, 1080p or Deep Color 
(Deep Colour) images may not be displayed 
properly.

• Sony recommends that you use an HDMI-

authorized cable or Sony HDMI cable.

• We do not recommend using an HDMI-DVI 

conversion cable. When you connect an 
HDMI-DVI conversion cable to a DVI-D 
component, the sound and/or the image may 
not be output. Connect other audio cords or 
digital connecting cords, then set “Input 
Assign” in the Input menu when the sound is 
not output correctly.

Notes on HDMI connections

• An audio signal input to the HDMI IN jack 

is output from the speaker output jacks, 
HDMI OUT jack and PRE OUT jacks. It is 
not output from any other audio jacks.

• A video signal input to the HDMI IN jack 

can only be output from the HDMI OUT 
jack. The video input cannot be output from 
the VIDEO OUT jacks or MONITOR OUT 
jacks.

• The audio and video signals of HDMI input 

are not output from the HDMI OUT jack 
while the receiver menu is displayed.

• When you want to listen to the sound from 

the TV speaker, set “Audio Out” to 
“TV+AMP” in the HDMI settings menu. If 
set to “AMP”, the sound is not output from 
the TV speaker.

• DSD signals of Super Audio CD are not 

input and output.

• Audio signals (sampling frequency, bit 

length, etc.) transmitted from an HDMI jack 
may be suppressed by the connected 
component. Check the setup of the 
connected component if an image is poor or 
the sound does not come out of a component 
connected via the HDMI cable.

• Sound may be interrupted when the 

sampling frequency, the number of channels 
or the audio format of audio output signals 
from the playback component is switched.

• When the connected component is not 

compatible with copyright protection 
technology (HDCP), the image and/or the 
sound from the HDMI OUT jack may be 
distorted or may not be output.
In this case, check the specification of the 
connected component.

• You can enjoy High Bitrate Audio (DTS-HD 

Master Audio, Dolby TrueHD), multi 
channel Linear PCM only with an HDMI 
connection.

• Set the image resolution of the playback 

component to more than 720p/1080i to 
enjoy High Bitrate Audio (DTS-HD Master 
Audio, Dolby TrueHD).

• The image resolution of the playback 

component may need certain settings be 
made before you can enjoy multi channel 
Linear PCM. Refer to the operating 
instructions of the playback component.

• Not every HDMI component supports all 

functions that are defined by the specified 
HDMI version. For example, components 
that support HDMI version 1.3a, may not 
support Deep Color (Deep Colour).

• Refer to the operating instructions of each 

connected component for details.

Содержание STR-DA3500ES





















































































































































Отзывы: