Sony SRX-T420, Руководство по эксплуатации

Страница: 65 / 75

65
INSTALLATION Window
Cha
p
te
r 4
A
d
jus
tment
s
a
nd Se
tt
ing
s
Us
ing t
he SRX
Con
tr
o
ller
INSTALLATION Window
The INSTALLATION window is used to adjust the
projected picture and to change the lamp output, etc.
LENS CONTROL
Adjusts the projected picture on the screen.
Zoom +/–: Adjusts the size of the picture. Clicking
enlarges the picture size, and reduces the picture
size.
Focus +/–: Adjusts the picture focus. Clicking focuses
on a picture further back. Clicking focuses on a
forward picture.
ELECTRIC V SHIFT FUNCTION
Adjusts the vertical position of the projected pictures
electrically. As the setting value increases, the picture
moves upward. As the setting value decreases, the picture
moves downward.
Clicking the “RESET” button resets the setting to the
factory-preset values.
• This function is effective in the following cases:
- When single-screen mode is selected
- When quad-screen mode is selected and
“PROGRESSIVE DISPLAY MODE” is set to “On”
• When this function is used for quad-screen mode, all the
projected signals should be genlocked to synchronize
with each other with a phase difference of less than 5
µsec. If they are not synchronized, the picture is not
displayed correctly.
IMAGE FLIP
Flips the picture.
Select it from the drop-down list displayed by clicking
according to the installed condition of the projector.
Off: Normal projection
H: Flips the picture horizontally
V: Flips the picture vertically
HV: Flips the picture horizontally and vertically
PROGRESSIVE DISPLAY MODE
Normally, click the “Off” radio button.
Click the “On” radio button when the signals from four
input boards are used to project a 2048 (1920) × 1080-pixel
signal as a 4096 (3840) × 2160-pixel 4K image or to
project a 1400 × 1050-pixel (SXGA+) signal as a 2800 ×
2100-pixel image in single-screen mode.
SQUEEZE
This function allows the input signal to be displayed on the
screen in a converted aspect ratio.
When you click the “On” radio button, the 720p, 1920 ×
1080 or 2048 × 1080 signal with a 16:9 aspect ratio can be
displayed by stretching to a 2.39:1 aspect ratio.
When you click the “Off” radio button, the input signal is
displayed without converting the aspect ratio.
This function is available only for projection in single-
screen mode.
LAMP POWER
Adjusts the lamp power output.
Lamp Power : You can reduce the lamp power to a value
from 53% to 100% in increments of 1% using the
or button.
Notes
Note
Off H
V HV