54
Starting the SRX Controller
Chap
te
r 2
Pr
epa
ra
tio
n
s
Connecting the Computer via the
RS-232C
Starting the SRX
Controller
Starting the SRX Controller
Double-click the
icon for the SRX Controller in the
desktop window of the computer.
The SRX Controller starts and the Program Launcher
screen is displayed.
Note when starting the SRX Controller
When the Operating System of the computer is Windows
XP SP2 or later, or any commercially available firewall
software is installed in your computer, the following may
occur. In these cases, unblock the Windows firewall
following the procedures below.
For Windows XP SP2 or later
If the dialog shown below appears when the SRX
Controller is started, select “Unblock.” When the dialog
does not appear but the computer does not access the
projector, start “Windows Firewall” from “Control Panel,”
and then add “SRX Controller” to the list in the
“Exceptions” tab.
For commercially available firewall software
Add “SRX Controller” to the Exceptions list, referring to
the operating instructions supplied with the software.
RS-232C connector
Connecting cable (not supplied)
Computer for controlling
the projector
RS-232C connector
Содержание SRX-T420
Страница 39: ......
