Sony SRX-T420, Руководство по эксплуатации

Страница: 50 / 75

50
Installing the SRX Controller in a Computer for Controlling the Projector
Chap
te
r 2
Pr
epa
ra
tio
n
s
Unsuitable Conditions
Do not use the projector under the following conditions.
Laying the unit on its side or upside down
Tilting the unit to the right or left
Avoid tilting the projector more than ± 10 degrees. Doing
so may cause color shading or shorten the lamp life
excessively.
Blocking the ventilation holes
Avoid using a thick-piled carpet or anything that covers
the ventilation holes (exhaust/intake). Otherwise, internal
heat may build up.
For the locations of the ventilation holes (exhaust/intake),
see “Location and Function of Controls” on page 46.
Installing the SRX
Controller in a Computer
for Controlling the
Projector
If you install the supplied SRX Controller in a computer,
you can control the projector from the computer.
System Requirements
The following are required to operate the supplied SRX
Controller.
• Computer: Intel Pentium M 1.6GHz or higher, and a
recommended CPU in your Operating System
– Installed memory: 256 MB or more (512 MB or more
recommended), and recommended memory in your
Operating System
– Communication: LAN (10BASE-T/100BASE-T) or
COM (RS-232C)
– VGA: XGA (1024 × 768) or higher
– HDD: Usable memory with 15 MB or more on the
built-in hard disk drive
– CD-ROM drive: × 8 or faster
• Operating System: Microsoft Windows XP Professional
SP2 (English or Japanese version) (excluding ×64
Edition) or Microsoft Windows Vista Business (English
or Japanese version)
Intel and Pentium are registered trademarks of Intel Corporation in
the United States and other countries.
Microsoft, Windows XP and Windows Vista are registered
trademarks of Microsoft Corporation in the United States and other
countries.
User Account Control of Windows Vista
Windows Vista incorporates the User Account Control
(UAC) function for improving its security level. As the
SRX Controller supports the UAC function, the warning
dialog of UAC may be displayed during installation or
activation of application.
When the warning dialog is displayed, allow execution of
the application in the following procedure. Otherwise, the
SRX Controller cannot be executed.
When the unidentified application dialog is
displayed
Select “Allow” to allow execution of the application.