Sony SRX-R320, Руководство по обслуживанию

Страница: 39 / 406

1-31 (E)
SRX-R320
1-4-10. Power Unit (for Lamp) and Inverter (for Lamp)
Tighten the following screw and bolt to the tightening torque described below.
Tightening torque
.
Supplied bolt: 15.0
?
2.25 N
.
m
.
Supplied screw: 2.60
?
0.39 N
.
m
1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Remove the panel (U3). (Refer to Section 1-3-4.)
4. Remove the panel (U6). (Refer to Section 1-3-5.)
5. Remove the panel (U5). (Refer to Section 1-3-6.)
6. Remove the panel (U4) block assembly. (Refer to Section 1-3-9.)
7. Remove the panel (U4B). (Refer to Section 1-3-10.)
8. Remove the two hexagonal head bolts (M10
x
15), the two spring washers and the two washers from
the two positive pole plates.
9. Remove the two supplied bolts, the two supplied spring washers and the two supplied washers from
the two terminals of the power unit (for lamp).
10. Remove the supplied screw, then remove the harness.
11. Remove the four screws (PSW4
x
16), then remove the inverter (for lamp).