Sony SRX-R320, Руководство по обслуживанию

Страница: 104 / 406

2-14 (E)
SRX-R320
6. Select the connection with a radio button of “RS-232C” or “Ethernet”.
When “RS-232C” is selected: Enter the COM port to be used.
When “Ethernet” is selected: Enter the IP address.
n
The
[Search]
button is unavailable.
7. Click the
[OK]
button.
8. Enter the numeric value in the box that requires the data writing, and then click the
[Write]
button.
n
The range of numeric value that you can enter for each item is as follows.
.
Serial Number: 0 to 9999999 (seven-digit)
.
Operation Timer: 0 to 9999999 (seven-digit)
.
Lamp timer: 0 to 9999 (four-digit)
9. Click the
[Close]
button.
10. Start the Filter Timer setting tool, then perform the writing of fi lter timer data.
n
Keep the P/S converter box in blank.
11. Perform steps 2 to 11 of Section 2-5, and then perform the writing of white balance (WB) data of the
prism block.
12. After the writing is completed, disconnect the connection of each device.
[Write]
button
Fig. 2-8c