Sony SRW-9000, Руководство по эксплуатации

Страница: 189 / 207

Warning/Error Messages 189
App
end
ix
e
s
0013 TELEFILE FMT
NG Telefile format is
invalid in one or
more locations.
0014 TELEFILE RD
FAIL Telefile read failure
occurred.
0015 TELEFILE WR
FAIL Telefile write failure
occurred.
0016 TELEFILE WR
INHI Attempt to record
was made when
entire Telefile is
write inhibited.
0017 NO TELEFILE
LABE Telefile could not be
recognized.
001A ACC OVERLOAD Power consumption
by connected
accessories has
exceeded the rated
limit. Make sure that
total power
consumption by
accessories does not
exceed 16 W.
001C LENS POWER
OFF Stop the power
supply to the LENS
connector.
001D DC OUT POWER
OFF Stop the power
supply to the DC
OUT connector.
001E RM POWER OFF Stop the power
supply to the
REMOTE connector.
001F VF POWER OFF Stop the power
supply to the VF
connector.
0020 VIDEO PLL
UNLCOK The timing generator
PLL is not locked to
the reference video
signal.
0022 AUDIO PLL
UNLOCK Audio clock
generator PLL is not
locked to reference
video signal.
0030 NO SDI INPUT When the optional
HKSR-9001 is
installed, there is no
valid input to the
AUX IN connector.
Code Message Description
0031 SDI INPUT
UNLOCK The phase of the
signal input to the
AUX IN connector
does not correspond
to the setting made
on the <GENLOCK>
page
(see page 143)
of the Camera
>MAINTENANCE
menu. Check the
setting and the input
signal.
0032 INVALID SDI
DATA Data of the signal
input to the AUX IN
connector is invalid.
0036 SDI FMT
MISMATCH Format of signals
input to AUX IN
connector does not
match system setting.
0038 MARI RST Abnormality such as
insecurity of
synchronization was
detected during
recording operation.
Check the recording.
0039 PIER RESET This message
generates when a
tape recorded in a
format which the
current system
setting does not
support is played
back.
0050 NO PB RF Playback head is not
reading digital data
from tape.
0051 BAD CH
CONDITION Playback signal
quality is bad.
0056 PB SEG NG Abnormal recording
was detected on the
tape being played
back. Confirm
whether there was an
abnormal operation
or instability in
power during
recording or power-
on/off.
0057 PB TR ID NG
Code Message Description