Wireless Speaker
SRS-XB12
About the indicators
CHG (charge) indicator (orange)
Note
A speaker that is in use can be charged if it is connected to an AC outlet via a USB AC adaptor (commercially available), or
connected to a booted computer. In this case, it may take longer to charge the built-in battery depending on the conditions of use.
Therefore, it is recommended to turn off the speaker when charging.
When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to
an AC outlet via a USB AC adaptor (commercially available), or connected to a booted computer. As a result, sound becomes
low. This is not a malfunction. Turn off the speaker and charge the built-in battery sufficiently.
In an extremely cold or hot environment, charging stops for safety. If charging takes a long time, it also makes charging of the
speaker stop. To resolve these issues, disconnect the micro-USB cable from the speaker and connect it again within an operating
temperature between 5 °C and 35 °C (41 °F and 95 °F).
Power/
(BLUETOOTH) indicator (blue)
L (left)/R (right) indicators (white)
Turns off
The speaker has completed charging.
Lights up
The speaker is being charged.
Flashes quickly (3
times a second)
An abnormality of the built-in battery has been detected. Stop charging immediately.
Flashes slowly
The built-in battery is running low and needs to be charged.
Flashes 3 times and
turns off
If the CHG (charge) indicator flashes 3 times and goes off when you turn on the speaker, the
built-in battery is empty and needs to be charged.
Lights up
The speaker is connected to a BLUETOOTH device.
Flashes quickly (3 times
a second)
The speaker enters the pairing mode.
Flashes slowly
The speaker is waiting for a BLUETOOTH device to connect to.
Flashes once
Each time you press the -/+ (volume) button, the indicator flashes once.
Flashes 3 times
When you operate the -/+ (volume) button and the volume is set at the lowest or highest
level, the indicator flashes 3 times.
Flash
The speaker enters the Speaker Add function.
The L (left)/R (right) indicators flash when the connection with the Speaker Add function fails.
Light up
The Speaker Add function is used on the speaker.
49
