The speaker is searching for a BLUETOOTH device.
To pair a BLUETOOTH device you have not registered (paired) before, proceed to step
.
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
. The speaker
will automatically be connected just by turning on the BLUETOOTH function on the smartphone/iPhone.
Depending on the BLUETOOTH device, it may be reconnected just by turning on the power to the speaker. For
details, refer to the operating instructions supplied with the BLUETOOTH device.
When the indicator stays lit
The speaker has been connected to the BLUETOOTH device.
To connect to other BLUETOOTH deivces, follow one of the procedures below.
To pair a BLUETOOTH device you have not registered (paired) before, proceed to step
.
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
. The speaker
will automatically be connected just by turning on the BLUETOOTH function on the smartphone/iPhone.
Press and hold the
(power)/
PAIRING button until you hear beeps and the power/
(BLUETOOTH)
indicator begins to flash quickly in blue.
The speaker enters pairing mode.
3
Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
When a list of detected devices appears on the display of the BLUETOOTH device, select “SRS-XB12.”
If a passkey
*
is required on the display of the BLUETOOTH device, enter “0000.”
4
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
*
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the power/
(BLUETOOTH) indicator stops flashing and stays
lit.
5
16
