9
Power Switch
Turns on the power when set to the "I" position.
Level Meters
With the use of the METER switch, these meters can be
switched to show either MASTER or MONITOR output
levels. After the power is turned on, the lowest LED
indicating the -
∞
level stays lit on each meter.
MONITOR SOURCE Selector Buttons
Allow selection of the signal to be routed to the MONITOR
matrix switcher. More than two signals selected at a time
are mixed.
AUX 1 to 4 Buttons:
Pressing either AUX 1 or 2 button supplies the same AUX
1 or 2 signal simultaneously to both matrix inputs 1 and 2.
When both buttons are pressed, the AUX 1 signal is sent
to matrix input 1, while the AUX 2 signal is sent to matrix
input 2. The AUX 3 and 4 buttons operate in the same way.
RETURN Button:
Supplies the RTN IN 1 and 2 signals to matrix inputs 1 and
2. The RETURN LEVEL control is bypassed, so its setting
has no effect on these signals.
PFL Button:
Connects the PFL signal to matrix inputs 1 and 2.
1-2 Button:
Connects the post-fader MASTER 1 and 2 output signals
to matrix inputs 1 and 2.
MONI 1-2 Button:
Supplies the signals from the MONITOR INPUT 1 and 2
connectors to matrix inputs 1 and 2.
3-4 Buttons:
Connects the post-fader MASTER 3 and 4 output signals
to matrix inputs 3 and 4.
MONI 3-4 Buttons:
Supplies the signals from the MONITOR INPUT 3 and 4
connectors to matrix inputs 3 and 4.
EDIT Button:
Allows remote control of MONITOR SOURCE selection
from the video editor. Pressing the EDIT button invalidates
the settings of all MONITOR SOURCE selector buttons
except PFL.
2CH Button:
Mixes the matrix input 3 and 4 signals with the matrix input
1 and 2 signals.
MONITOR Matrix Switcher Buttons
Used to control the built-in 4-input/4-output matrix switcher
capable of sending any matrix input to any MONITOR
OUTPUT connector. The MONITOR SOURCE selector
buttons are used to select the inputs to this switcher.
EDITOR Indicator
Remains lit as long as the mixer is placed under the control
of the video editor.
MONITOR OUTPUT 1-2/3-4 Controls
Each provides control over the output level from the
MONITOR OUTPUT connectors 1 and 2 or 3 and 4. The
maximum position ("0" position) is the reference level.
MUTING Button
Cuts the signals to the MONITOR OUTPUT connectors.
RETURN BAL (Return Balance) Control
Controls the sound image definition of the RTN IN signal.
The sound image moves towards MASTER (or MONITOR)
output channels 1 and 3 when the RETURN BAL control is
rotated in the ODD direction. Alternatively, the image
moves towards MASTER (or MONITOR) output channels
2 and 4 when this control is rotated in the EVEN direction.
The MASTER (or MONITOR) output level at the maximum
position is 3 dB higher than at the center position.
RETURN LEVEL Control
Controls the RTN IN signal level. The maximum position
("0" position) is the reference level.
1-2,3-4 (MASTER Output Channel Selection)
Buttons
Press to select the MASTER output channels for
sending the RETURN signals. The signals are sent to
the channels indicated by the pressed button.
REC MODE (Recorder Assignment) Switch
Used to set the recorder assignment mode of the mixer
according to the video editor's control capabilities.
FIX 2CH:
Allows fixed assignment of a specific VTR as the
recorder.Select this position when a VTR with two audio
channels is used.
FIX 4CH:
Allows fixed assignment of a specific VTR as the
recorder.Select this position when a VTR with four audio
channels is used.
FREE 2CH:
Allows free recorder assignment. When this position is
selected, any VTR with two audio channels can be used as
the recorder.
FREE 4CH:
Allows free recorder assignment. When this position is
selected, any VTR with 4 audio channels can be used as
the recorder.
METER Switch
Used to select the input signals to the level meters.
MONITOR:
The meters display the MONITOR matrix switcher input
levels.
MASTER:
The meters display the post-fader MASTER output
signal levels.
1
2
3
4
5
6
7
8
9
10
11
12
Содержание SRP-V200
Страница 26: ...26 Made in Japan ...
