Sony SRP-F300, Руководство по эксплуатации

Страница: 12 / 20

12
NOTE
•
If 8 seconds pass after pressing a button, operation is canceled and the
mode will be back to the situation before starting RECALL.
•
The numbers not to be stored are not be displayed.
•
RECALL operation is impossible if you press RECALL/ENTER
when there is no RECALL-capable program. Also, any stored programs
which are set RECALL LOCK are never displayed. (Use an external
computer to set and release RECALL LOCK.)
•
When the LOCK indicator is lit, RECALL operation is impossible.
3-5. Changing REMOTE ID
REMOTE ID is preset at factory to 01. It can only be changed on the SRP-F300 itself.
1
Press DISPLAY button. Then REMOTE/ID
indicator lights up and currently selected
number displays set number displays.
2
Press UP or DOWN button repeatedly until
the number you want appears. When you keep
pressing them, the number gains or loses
continuously.
3
Press RECALL/ENTER button when the
number you want appears. The number
display changes to light-up mode from flash
mode.
NOTE
•
If 8 seconds pass after pressing a button, operation is canceled and the
mode will be back to the situation before starting changing REMOTE ID.
•
While the LOCK indicators is lit, you cannot change the REMOTE ID.
RECALL
/ENTER
UP
DOWN
DISPLAY
FLASHES
FLASHES