Sony SRG-300SE, Руководство по обслуживанию

Страница: 33 / 84

2-1 (E)
SRG-300SE/301SE
Section 2
Procedure after Replacement of Parts
When removing or replacing any of the following parts, perform the procedure according to the steps
described in this section.
.
SY-437 board (Refer to Sections 2-1-2 → 2-1-3 → 2-2.)
.
AU-365 board (Refer to Sections 2-1-2 → 2-1-3 → 2-3.)
.
SW-1654 board (Refer to Section 2-4.)
.
LED-530 board (Refer to Section 2-5.)
.
CN-3766 board (Refer to Section 2-6.)
.
Service motor assembly (MD-156) (Refer to Sections 2-1-2 → 2-1-3 → 2-7.)
.
PAN/TILT mechanical portion (Refer to Sections 2-1-2 → 2-1-3 → 2-7.)
.
Cabinet of PAN/TILT movable portion (Refer to Sections 2-1-2 → 2-1-3 → 2-7.)
.
FCB assembly (Refer to Sections 2-1-2 → 2-1-3 → 2-8.)
2-1. Preparation
2-1-1. Required Equipment/Tools
.
Personal computer (hereafter referred to as “PC”)
t
For the operating environment, refer to “Required system configuration” in the user’s guide.
.
SDI monitor
t
Prepare the 3G-SDI compatible monitor.
Prepare the 3G-SDI level A mapping.
.
LAN cable
.
BNC cable
.
12 VDC power supply