– 8 –
Getting Started
20
US
Setting the day and time
Set the day and time so that you can stamp day and time for the
incoming messages. You will hear the recorded day and time when
you play back messages.
1
Press
(PROGRAM)
.
2
Turn Jog Dial to choose “BASE
SETTINGS”, and then press Jog
Button (ENTER).
3
Turn Jog Dial to choose
“CLOCK”, and then press Jog
Button (ENTER).
4
Set the correct day of the week
by turning Jog Dial, and then
press Jog Button (ENTER).
ENTER HOUR AND
PRESS JOG BUTTON
12
:00AM
Step 6
Jog Button
(ENTER)
CLOCK
GO BACK
SUNDAY
MONDAY
TUESDAY
Getting Started
21
US
Getting Started
To set up the voice mail service (S2430)
In order to use this service, you must first subscribe to voice mail
service (see page 65). The voice mail service is preset to “ACTIVE”.
1
Perform steps 1 to 3 on page 17.
2
Turn Jog Dial to choose “VOICE MAIL”, and then press Jog
Button (ENTER).
3
Turn Jog Dial to choose “ACTIVE” or “INACTIVE”, and
then press Jog Button (ENTER).
You hear a long confirmation beep.
Getting Started
21
US
Getting Started
5
Set the hour (1 to 12) by turning Jog Dial, and
then press Jog Button (ENTER).
6
Set the minute (00 to 59) by turning Jog Dial,
and then press Jog Button (ENTER).
7
Choose “AM” or “PM” by turning Jog Dial, and
then press Jog Button (ENTER).
You hear a long confirmation beep and the day
and time you just entered is announced. Then
the phone starts counting time.
Notes
• Do not allow more than 60 seconds to elapse during the operation procedure.
• “SUN 12:00AM” on the display of the base phone flashes when the day and
time is cleared due to a power interruption, or when you connect the base
phone to the AC outlet for the first time.
• If the current day and time are not set, you will not hear a time stamp when
you play back recorded messages.
Tip
When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Button (ENTER).
ENTER AM/PM AND
PRESS JOG BUTTON
12:00
AM
ENTER MINUTE AND
PRESS JOG BUTTON
12:
00
AM
Basics
26
US
1
Pick up the cordless handset
from the charger.
2
Press
(TALK)
and wait until
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
The dialing keys light up.
You then hear a dial tone.
“CORDLESS HANDSET IN
USE” appears on the display of
the base phone.
If you hear five short error
beeps and “OUT OF RANGE”
appears on the display, move
closer to the base phone.
3
Dial the phone number.
4
When you’re done talking, press
(OFF)
or replace the cordless
handset on the charger.
The display turns off.
To make a call after checking the phone number
You can dial the phone number before pressing
(TALK)
or
(LONG DIST. SAVER)
. If you make a mistake when dialing the phone
number, press
(ERASE)
to erase the number.
(*TONE)
(HOLD)
Basics
Making calls
VOL switch
(LONG DIST. SAVER)
I
(HEADSET)
jack
(ERASE)
(CALL WAITING/FLASH)
(REDIAL/PAUSE)
