Sony SPP-114, Руководство по обслуживанию

Страница: 11 / 32

11
Key Processing (Setting the Manual Test Mode) :
1. (Upper position) (Lower position) Set with #.
2. 3X# can be substituted with X .
4
0 1 2 3
TX
RX RX
MIC Lk
7
RF AF
0 QUIT 10 ch 20 ch Batt Alarm H A L T
G
KEY TEST
1 1 ch 11 ch 21 ch CHARGE DET
G g G G G
2 2 ch 12 ch 22 ch
G g g G G
3 3 ch 13 ch 23 ch
g g G G G
4 4 ch 14 ch 24 ch RX LOCK
g g g G G
5 5 ch 15 ch 25 ch TX LOCK
g g g g G
6 6 ch 16 ch T1 ch RSSI (H)
g g g g g
7 7 ch 17 ch T2 ch RSSI (L) — — — — —
8 8 ch 18 ch T3 ch DATA TX — — — — —
9 9 ch 19 ch T4 ch — — — — —
Purpose CH setting only SIGOUT control
General
operation
The standard is external communication
Condition
Application
state.
surveillance with
Measurement mode of
State for standard electrical adjustment
TALK LED.
consumption current.
process.
Upper position
Lower position
• By pressing the CH key there is increment of the channel.
However, this does not include the test channel.
• Control of the power source during 38# DATA TX is (TX & RX
RF & RX AF=ON) in 44# state.
• Control of the power source during the 70# key check mode is
41# state (TX OFF).
• For CH setting, SIGOUT control and power source control (with
the exception of above-mentioned 38# state) the state can be set
independently.
Example : In 15 ch, the order for carrying out TX modulation
level and RSSI (H) sensitivity setting is as follows :
The following are possible : 15#
n
44#
n
36#
36# n 15# n 44#
44# n 36# n 15#
*