Sony SLV-SF900G, Руководство по эксплуатации

Страница: 98 / 110

98
filename[01GB08ADD-NP0.fm] model name1[SLV-SF900G (ENG)] model name2[]
[3-062-327-11 (1)]
Remote
commander
S21
You cannot control
your TV.
t
Set your TV’s code number. The code number may change when you
replace the batteries for the remote commander (see page 8).
Cleaning
S22
The VCR needs to be
cleaned.
t
Clean the cabinet, panel and controls with a dry, soft cloth, or a soft
cloth slightly moistened with a mild detergent solution. Do not use
any type of solvent, such as alcohol or benzene.
Clock
S23 The clock has
stopped and “–:– –”
lights up in the
display window.
t
The clock stops if the VCR is disconnected from the mains for more
than one hour. Reset the clock and timer if needed (see page 19).
Power
S24
The
?
/
1
ON/
STANDBY switch
does not function.
t
Connect the mains lead to the mains securely.
Power
S25
The power is turned
on but the VCR does
not operate.
t
Moisture condensation has occurred. Turn the power off, unplug the
mains lead and leave the VCR to dry for over three hours.
S26
The tape is ejected
when you press
?
/
1
ON/STANDBY.
t
You have set a timer recording, but the tape on which you want to
record is protected (or contains protected recordings). Unlock the
protection or use another tape or replace the safety tab (see page 91).
S27
The display is not lit
when the VCR is in
STANDBY mode.
t
The VCR is in power save mode. Set the POWER SAVE option to
OFF in the OTHER OPTIONS menu (see page 66).
S28
POWER SAVE is set
to ON but the display
remains lit in
STANDBY mode.
t
The display is always lit if the VCR is in timer standby mode. For
more details regarding the energy saving function, see page 66.
Tape
S29
The tape is ejected
when you press
?
/
1
ON/STANDBY.
t
You have set a timer recording, but the tape on which you want to
record is protected (or contains protected recordings). Unlock the
protection or use another tape or replace the safety tab (see page 91).
S30
A tape cannot be
inserted.
t
Check that a tape isn’t already in the tape compartment.
SMARTLINK
S31 The SMARTLINK
function does not
work properly.
t
Check that your TV complies with SMARTLINK, NexTView Link,
MEGALOGIC, EASYLINK/CinemaLink, Q-Link or TV-LINK.
t
Make sure you use a 21-pin Scart cable to connect the VCR and your
TV.
t
Make sure the Scart cable is connected securely. Refer to your TV
manual for instructions.