Sony SLV-EX50 Скачать руководство пользователя страница 11

Страница: 11 / 75

– 1-7 –

Basic Operations

Basic Operations

Press CH +/– to select the channel you want to record.

Press REC SPEED to select the tape speed. (SP or LP for the PAL-N
color system, and SP or EP for the NTSC color system)

LP (Long Play) provides recording time twice as long as SP
(Standard Play). EP (Extended Play) provides recording time three
times as long as SP. However, SP produces better picture and audio
quality.

Press

REC to start recording.

The recording indicator lights up red in the display window.

To stop recording

Press

STOP.

To check the remaining tape length

Press DISPLAY. The white bar indicates the approximate length of tape
remaining.

* Appears for a few seconds when the ON SCREEN DISPLAY is pressed and when

the mode is changed.

Recording indicator

REC SPEED

REC

APC

VIDEO

APC

VIDEO

APC

VIDEO

• CH

continued

Remaining tape length
Time counter

Tape speed*

0 : 00 : 22

Basic Operations

To watch another TV program while recording

Press TV/VIDEO to turn off the VIDEO indicator in the display
window.

If the TV is connected to the VCR using an audio/video cable, set the
TV to TV input. If the TV is connected to the VCR using only the
antenna cable, skip this step.

Select another channel on the TV.

To save a recording

To prevent accidental erasure, break off the
safety tab as illustrated. To record on the tape
again, cover the tab hole with adhesive tape.

Tips

• To select a channel, you can use the number buttons on the remote commander.

Enter the channel number, then press ENTER.

• You can select a video source from the LINE-1 IN or LINE-2 IN (SLV-EX90S AR/

EX80S AR only) jacks using the INPUT SELECT or CH +/– buttons.

• The display appears on the TV screen indicating information about the tape, but the

information won’t be recorded on the tape.

• If you don’t want to watch TV while recording, you can turn off the TV. When using

a cable box, make sure to leave it on.

• You can have the VCR stop recording automatically after starting at a specified

time. For details, see “Setting the recording duration time” on page 47.

Notes

• The display doesn’t appear during still (pause) mode or slow-motion playback.
• If a tape has portions recorded in both PAL-N and NTSC systems, the time counter

reading will not be correct. This discrepancy is due to the difference between the
counting cycles of the two color systems.

• When you insert a non-standard commercially available tape, the remaining time

may not be correct.

• It may take up to one minute for the VCR to calculate and display the remaining

tape length after you press DISPLAY.

Safety tab

Recording TV programs (continued)

Basic Operations

Basic Operations

Recording TV
programs using
the Easy Timer
function

The Easy Timer function allows you to
make a timer recording of a program
without turning on your TV. Set the
recording timer to record only one
program that will be broadcast within
the next 24 hours using the EASY
TIMER knob. If the VCR clock has not
been set, you can also set the clock
before setting the timer recording.

Setting the Easy Timer