Sony SLV-ED100ME, Руководство по обслуживанию

Страница: 83 / 135

6-1 E
SECTION 6
ERROR CODES
This set displays an error code, and a mode code in case of error
on the display tube, if the operation stopped by error.
The following provides description concerned.
A: Error code ............................................................... Table 6-1
B: Mechanism position (Encoder) .............................. Table 6-2
C: Mode code in case of error .................................... Table 6-3
These codes are displayed at lower 5-digit positions of display
tube.
In this case, “ : ” between digits is not displayed.
Table 6-1. Error Codes
Table 6-3. Mode Codes in Case of Error
Display tube (lower 5 digits)
A C B
Code Description
0 NO ERROR
1 CAM ENCODER ERROR, LOAD DIRECTION
2 CAM ENCODER ERROR, UNLOAD DIRECTION
3 T REEL ERROR
4 S REEL ERROR
5 CAPSTAN ERROR
6 DRUM ERROR
7 INITIALIZE ERROR
8 CASSETTE UNLOADING ERROR
9 RESERVED
Code Description
0 EJECT (POWER ON)
1 EJECT (POWER OFF)
2 UNLOAD STOP
3 STOP (POWER ON)
4 POWER OFF (CASSETTE IN)
5 F. FWD
6 REW
7 LOW SPEED F. FWD
8 LOW SPEED REW
9 STANDBY
10 REC
11 REC (VISS)
12 REC PAUSE
13 PLAY
14 A. DUB
15 A. DUB PAUSE
16 CUE
17 REV
18 STILL (MECHA FWD)
19 FWD FRAME BY FRAME (FWD SLOW)
20 STILL (MECHA RVS)
21 RVS FRAME BY FRAME (RVS SLOW)
SLV-ED100/EZ2000/K990/KH9
Table 6-2. Mechanism position list
Code Position VTR status
0 NC Other than the following positions
1 EJECT EJECT (including POWER OFF)
2 CDOWN Cassette at down position
3 ULDEND Tape unloading end, DEW STOP
4 TLOAD Tape loading
5 HCLEAN Tape loading
6 LDEND Tape loading end
7 RVS
RVS varying-speed play
(including STILL, SLOW)
8 PR For FWD, FWDP/RVS conversion
9 FWDP FWD SLOW, FWD STILL
A FWD
PB, FWD varying-speed play, STOP
(DRUM ON)
B STOP STOP (DRUM OFF, POWER OFF)
C FR FF/REW
Position when emergency occurred
Position for which the mechanism destined
Display:
If the cam encoder alarm occurred when the mechanism was about
to move forward, and it stopped at NC position,
Position for which mechanism destined = A (FWD)
Position when emergency occurred
= 0 (NC),
accordingly, “A0” is displayed.
In case of emergency except cam encoder alarm or FL cassette
compartment alarm, the cam motor does not run, and therefore if
any emergency occurred at FWD position,
Position for which mechanism destined = A (FWD)
Position when emergency occurred
= A (FWD),
accordingly, “AA” is displayed.
* NC code is output when the mechanism is moving between re-
spective positions.