Sony SLV-D940P AZ, Руководство по обслуживанию

Страница: 22 / 125

1-12
52
Checking/changing/cancelling timer settings
Checking/changing/cancelling timer
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 9).
• When using a satellite or digital tuner, turn
it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press
V/v
to select (TIMER) and press ENTER.
The timer programming menu appears.
2
Press
V/v
to select setting you want to change
or cancel.
• To change the setting, press
B
/
b to select
the item you want to change, and press V
/
v
to change it.
• To cancel the setting, press CLEAR.
SET UP
V/v/B/b
ENTER
CLEAR
SET UP
ENTER
ENTER v V b B
3 5 0 :0 0 1 : 0 0 SP
2 0 : 0 0 : 3 0 LP
6 0 :3 0 : 0 0 Auto
MO 30
WE 02
TU 30
2 2
2
0 2
2
3 2
2 2
PR DATE START STOP SPEED
SET UP
ENTER
CLEAR
CLEAR
ENTER
v V b B
3 5 0 :0 0 1 : 0 0 SP
2 0 : 0 0 : 3 0 LP
6 0 :3 0 : 0 0 Auto
MO 30
WE 02
TU 30
2 2
2
0 2
2
3 2
2 2
PR DATE START STOP SPEED
SET UP
53
Checking/changing/cancelling timer settings
Ba
sic
O
p
er
at
ions
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
3
Press ENTER to confirm the setting.
4
Press ENTER to confirm all settings.
If any settings remain, turn off the VCR to return to recording standby.
To record from a satellite or digital tuner, or other source, leave the
connected equipment switched on.
ENTER
ENTER
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Programme 1
Programme 2
54
A/V Receiver hookup
Advanced Hookups
A/V Receiver hookup
A
Use this hookup if your A/V receiver has a Dolby* Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-
D symbol are trademarks of Dolby Laboratories.
A
DVD-VCR
Front (R) Front (L) Rear (R)
Subwoofer
l : Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Centre
Stereo audio cord (supplied)
[Speakers]
(red) (white)
[Speakers]
to audio input
(white) (red)
to OUT AUDIO L/R
55
A/V Receiver hookup
Ad
va
n
ce
d Hoo
kups
B
Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using and
.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “AUDIO SETUP” menu (page 58). If your AV amplifier (receiver) has
an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” menu
(page 58). Otherwise, no sound or a loud noise will come from the speakers.
B-1
B-2
B-2
OPTICAL
DIGITAL
AUDIO OUT
COAXIAL
B-1
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having a decoder
Subwoofer Centre
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
or
Coaxial digital
cord (not supplied)
l : Signal flow
Stereo audio cord
(supplied)
(red) (white)
to audio input
(white) (red)
to OUT AUDIO L/R
and
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting