COLOR CCD CAMERA
User Guide
24
COLOR CCD CAMERA
User Guide
25
How to Use the Camera
SHUTTER : You can select either auto or manual shutter.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Up
and Down buttons so that the arrow indicates ‘EXPOSURE’.
2. Select a desired mode using the Up and Down buttons.
AGC (AUTO GAIN CONTROL):
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 30dB.
- HIGH : Allows automatic gain control from 0 to 42dB.
SENS-UP :
When it is night or dark, the camera automatically
detects the light level and maintains a clear picture if
this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
• To produce better results with A.FLK, do not use it in conjunction with the WDR
mode of the BACKLIGHT menu.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization Type,
the picture may become unstable if the camera faces a bright fluorescent light.
Therefore, take care when choosing the installation position.
• When you use DC lens, set the shutter mode to fixed(---) if Color Rolling is occurred.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Notes
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
• If you press the SET button in ‘AUTO’ mode, You can adjust brightness by increasing
or decreasing the shutter speed. (X2~X256)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is
that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
Notes
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal.‘ by using the Up
and Down buttons so that the arrow indicates ‘White Bal.‘ .
2. Select a desired mode using the Up and Down buttons.
White Balance (White Bal.)
✽
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,800º and 10,500ºK
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
