Sony RMT-V503C, Руководство по обслуживанию

Страница: 21 / 142

1-11
46
Recording TV programmes using the VIDEO Plus+ ® system
3
Press
V/v
to select “VideoPlus,” then press
ENTER.
The “VideoPlus” menu appears.
4 Press the number buttons to enter the PlusCode
number.
If you make a mistake, press CLEAR and
re-enter the correct number.
You can also press
B
to delete the last entered
number.
5
Press ENTER.
The programme position, date, start and stop
times, tape speed and PDC (Programme
Delivery Control) setting appear on the TV
screen.
• If “– –” appears in the “PR” (programme)
column (this may happen for local
broadcasts), you have to set the appropriate programme position
manually.
Press
V/v
to select the desired programme position. Without setting the
programme position, you cannot select the date, start and stop times, tape
speed and PDC setting.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the “PR”
position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
ENTER
RETURN SET UP
Code – – – – – – – – –
Code
VideoPlus
B
: 0–9
Correct :
1 2 3
4 5 6
7 8 9
0
CLEAR
ENTER
RETURN SET UP ENTER
Code 1 2 3 4 – – – – –
Code
VideoPlus
B
: 0–9
Correct :
INPUT
SELECT
ENTER
CLEAR
35
– –
– –
– –
– –
– –
SP
– –
– –
– –
– –
– – Off
– –
– –
– –
– –
– – 19
– –
– –
– –
– –
– –
19 : 00
– – : – –
– – : – –
– – : – –
– – : – –
– – : – – 20 : 00
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
CLEAR SETUP
ENTER
v V b B
SA
– –
– –
– –
– –
– –
PR DATE START STOP SPEED PDC
47
Recording TV programmes using the VIDEO Plus+ ® system
Ba
sic
Op
er
atio
ns
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x
.
Daily/weekly recording
In step 6, press
v
to select the recording pattern. Each time you press
v
, the
indication changes as shown below. Press
V
to change the indication in reverse order.
today
t
DLY
t
MO~SA
t
MO~FR
t
W-SA (every Saturday) .....
t
W-SU (every Sunday)
t
1 month later
t
(dates count down)
t
today
Timer recording with PDC signals
Some broadcast systems transmit PDC signals with their TV programmes. These
signals ensure that your timer recordings are made regardless of broadcast delays,
early starts, or broadcast interruptions.
To use the PDC function, set “PDC” to “On” in step 6. You can also use the PDC
function for a source connected to one or more of the LINE inputs.
6
If you want to change the date, tape speed and
the PDC setting:
1
Press
B/b
to select the item you want to
change.
2
Press
V/v
to reset it.
• To record the same programme every day or
the same day every week, see “Daily/weekly
recording” on page 47.
• To use the PDC function, set “PDC” to “On.” For details about the PDC
function, see “Timer recording with PDC signals” on page 47.
7
Press ENTER to confirm the setting.
8
Press ENTER to confirm all settings.
9 Press
?/1
to turn off the DVD-VCR.
The indicator appears in the display window and the VCR stands by for
recording.
To record from other equipment, leave the connected equipment switched
on.
ENTER
35
– –
– –
– –
– –
– –
SP
– –
– –
– –
– –
– – Off
– –
– –
– –
– –
– – 19
– –
– –
– –
– –
– –
19 : 00
– – : – –
– – : – –
– – : – –
– – : – –
– – : – – 20 : 00
– – : – –
– – : – –
– – : – –
– – : – –
– – : – –
CLEAR ENTER SETUP
v V b B
SA
– –
– –
– –
– –
– –
PR DATE START STOP SPEED PDC
ENTER
ENTER
continued
48
Recording TV programmes using the VIDEO Plus+ ® system
To watch another TV programme after setting the timer
Set the TV to the TV’s antenna input and then select another channel on the TV.
This change does not affect the recording.
To use the Auto Tape Speed function
In step 6, press
v
to select “Auto.” When you are recording a programme in the SP
mode and the remaining tape length becomes shorter than the recording time, the
recording tape speed is automatically changed to LP mode. Note that some noise will
appear on the picture when the tape speed is changed. To operate this function
correctly, the “Tape Select” setting in the “VIDEO SETUP” menu must be accurate
(see page 99).
Tips
• If the indicator appears, this means that the VCR is currently recording this programme.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 40).
– Display tape information on the TV screen (page 43).
• To set the line input video source, you can also use the INPUT SELECT button.
• You can set the extended time for the VIDEO Plus+ setting by 10, 20, 30, 40, 50, or 60
minutes. Set “VideoPlus Extend” in the “USER SET” menu to the desired extended time on
page 104.
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
settings” on page 52.
Notes
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the
VCR will start recording at the set time without using the PDC function.
• The indicator flashes in the display window when you press
?
/
1
with no tape inserted.
49
Recording TV programmes using the timer
Ba
sic
Op
er
atio
ns
Recording TV programmes using the timer
You can preset up to six programmes at a
time.
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
When using a satellite or digital tuner, turn
it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 10).
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1 Press SELECT VIDEO to control the VCR.
2
Press TIMER.
The “TIMER METHOD” menu appears.
INPUT
SELECT
V/v/B/b
ENTER
x
TIMER
SELECT VIDEO
?/1
Number
buttons
SUBTITLE/
TIMER
Standard
VideoPlus
RETURN
TIMER METHOD
SET UP ENTER
V v
continued