1-7
RM-PP1
1-6. Connections and Setup
For details of the matching connectors and cables, refer to Section 1-7.
For details of the input/output signals of this unit, refer to Section 1-8.
For the connections and setup, refer to “Preparations” of the operation manual.
n
Setup can be performed by Program Play Box Control Software. It carries out by Maintenance Menu of
this software. Refer to Help recorded on CD-ROM in detail.
75
Z
Z
Z
Z
Z
Termination Switch on Rear Panel
Only when the SD reference video loop-through output is not used, set the 75
Z
termination switch to
ON.
Error Message
If “Error” is shown in the LCD display window of this unit, refer to “Error Messages” of the operation
manual.
Installation of Program Play Box Control Software
When installing the Program Play Box Control Software in a computer, please carry out according to the
installer supplied with the software.
n
Be sure to install this software in a personal computer with the following requirements. When this
software is installed in a personal computer without the follwing requirements, this software may not be
performed normally.
OS:
Microsoft Windows XP
Microsoft Windows NT 4.0 (with Service Pack 3 or later)
Microsoft Windows 2000
Microsoft Windows 98 Second Edition
CPU:
500 MHz or higher
Memory:
Minimum 128 MB
Hard disk:
Minimum 20 MB of available hard disk space
Drive:
CD-ROM
Display:
XGA video display, Capable of 1024
x
768 resolution
1-6. Connections and Setup
