67
Section 3
Error Code
If a problem occurs during operation of the unit, an error code will appear in the view finder display.
Check the content of the error code and respond accordingly.
3-1. Error Code List
Error
code
Description
Check and Action
E10-005
Lens overheat (Pitch direction (vertical))
Check: lens block, IC9600 (LD-136 board), IC6000 (VC-41 board), and the
peripheral devices.
Repair or replace: VC-41 board, LD-136 board, or lens block.
E10-006
Lens overheat (Yaw direction (horizontal))
Check: lens block, IC9600 (LD-136 board), IC6000 (VC-41 board), and the
peripheral devices.
Repair or replace: VC-41 board, LD-136 board, or lens block.
E10-007
Image stabilization is not effective. (PITCH
angular velocity sensor output sticking)
Check: lens block, IC9600 (LD-136 board), IC6000 (VC-41 board), SE7701
(SE-1187 board) and the peripheral devices.
Repair or replace: VC-41 board, LD-136 board, SE-1187 board or lens block.
E10-008
Image stabilization is not effective. (YAW
angular velocity sensor output sticking)
Check: lens block, IC9600 (LD-136 board), IC6000 (VC-41 board), SE7701
(SE-1187 board) and the peripheral devices.
Repair or replace: VC-41 board, LD-136 board, SE-1187 board or lens block.
E10-009
Image fluctuation during active image
stabilization cannot be corrected. (Angular
velocity sensor output sticking)
Check: lens block, IC9600 (LD-136 board), IC6000 (VC-41 board), SE7701
(SE-1187 board) and the peripheral devices.
Repair or replace: VC-41 board, LD-136 board, SE-1187 board or lens block.
E10-101
Zoom malfunction (The Zoom lens cannot be
initialized.)
Check: lens block, IC9550, IC9551, IC9800, IC9870 (LD-136 board), IC6000
(VC-41 board), and the peripheral devices.
Repair or replace: VC-41 board, LD-136 board, or lens block.
E10-103
Reset position detecting error at initializing
stepper iris.
Check: lens block, IC9700 (LD-136 board), IC6000 (VC-41 board), and the
peripheral devices.
Repair or replace: VC-41 board, LD-136 board, or lens block.
E10-104
Lens initialization error
Check: lens block, IC9550, IC9551, IC9700, IC9800, IC9870 (LD-136 board),
IC6000 (VC-41 board), and the peripheral devices.
Repair or replace: VC-41 board, LD-136 board, or lens block.
E10-10A
Abnormal movement of focus lens
Check: lens block, IC9800, IC9840 (LD-136 board), IC6000 (VC-41 board), and
the peripheral devices.
Repair or replace: VC-41 board, LD-136 board, or lens block.
E12-001
Abnormal white level current value for
variable ND filter (Performance is poor by
failure)
Check: lens block, IC9700 (LD-136 board), IC6000 (VC-41 board), and the
peripheral devices.
Repair or replace: VC-41 board, LD-136 board, lens block.
E12-002
Detection of abnormal temperature due to open
circuit or short circuit of thermistor for variable
ND filter
Check: lens block, IC9700 (LD-136 board), IC6000 (VC-41 board), and the
peripheral devices.
Repair or replace: VC-41 board, LD-136 board, lens block.
E40-001
Detection of overcurrent
Check: battery level because the error may occur depending on battery level.
Then replace battery and check the symptom.
If the replacement makes no effect, check IC5100, IC0300 (DD-53 board),
IC0600, IC6000 (VC-41 board), and the peripheral devices.
Repair or replace: DD-53 board, VC-41 board.
E40-002
Abnormal temperature of battery (high
temperature)
Check: temperature of the battery, and the peripheral devices.
Replace battery or place battery in a cool place.
If the problem persists, repair or replace DD-53 board, VC-41 board.
E91-145
Communication error from IC6000 (VC-41
board) to IC5700 (DD-53 board)
Check: IC6000 (VC-41 board), IC5700 (DD-53 board), and the peripheral
devices.
Repair or replace: DD-53 board, VC-41 board.
E91-1C0
USB error
Check: IC6000 (VC-41 board), PCIeSW (AR-5 board), IC2602 (VC-41 board),
USB3.0 connector (VC-41 board), USB2.0 connector (IO-283 board), and the
peripheral devices.
Repair or replace: IO-283 board, VC-41 board, AR-5 board.
E91-1D0
Communication error from IC6000 (VC-41
board) to GPS module
Check: GPS module (GP-1019 board), IC6000 (VC-41 board), and the peripheral
devices.
Repair or replace: GP-1019 board, HN-441 board, VC-41 board.
E91-250
Communication error from IC6000 (VC-41
board) to IC1600 (VC-41 board)
Check: IC6000, IC1600 (VC-41 board), and the peripheral devices.
Repair or replace: VC-41 board.
E91-350
Communication error from IC6000 (VC-41
board) to IC2300 (VC-41 board)
Check: IC0600, IC2300 (VC-41 board), and the peripheral devices.
Repair or replace: VC-41 board.
E91-357
Memory failure in IC2300 (VC-41 board)
Check: IC2300 (VC-41 board), and the peripheral devices.
Repair or replace: VC-41 board.
Continued
