16
When replacing VC board (in case adjustment values cannot be read):
1. Read the QR code printed in EVF display device (LCD902) using with “QR_Code_Reader_Ver1.0_x64”.
2. Make sure the adjustment value from the read value as shown below, and memorize it.
3. Start the Adjust Manual in the Adjust Station and execute the “EVF Data Input” on the ADJUST tab.
1-7-4. Checking the Wi-Fi Function
After this unit has been disassembled and reassembled, check the Wi-Fi function.
Required equipment:
Personal computer or smartphone with Wi-Fi interface
Procedure:
1. Turn on the unit and enable the Wi-Fi function.
Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.
2. Use the PC or the smartphone to check that the unit is detected as a connectable wireless device.
1-8. Service Tools
Part No
Name
Usage/Note
J-6323-420-A
Torque screwdriver bit
Tightening screws, for M2 machine screw, for M2.6 machine
screw
J-6325-110-A
Torque screwdriver bit (M1.4)
Tightening screws, for precision M1.4, for precision M1.7
J-6325-380-A
Torque screwdriver bit (M2)
Tightening screws, for precision M2, for precision M2.6
J-6325-400-A
Torque screwdriver (3 kg)
Tightening screws
J-6252-510-A
Torque screwdriver 6 kg
7-600-002-52
Locking compound (1401B)
Preventing self-loosening of screws
Commercially available
Jack nut driver 3.5mm dia
For 3.5 mm audio jack
Brightness value
White balance value
Example when QR code is 1958817021A
11
10
9
8
7
6
5
4
3
2
1
A
1
0
2
7
1
8
8
5
9
195
172
1
Tip
