Sony PMW-500, Руководство по эксплуатации

Страница: 164 / 203

Saving and Loading Lens Files
164
Chapt
er
7
Sa
ving and
L
oadi
ng Us
er Set
ting Dat
a
Use FILE >Lens
(see page 153)
in the setup menu
to set the data in lens files.
You can set the following data and save it as a
lens file.
See “Basic Setup Menu Operations” (page 109) for
information about menu operations.
To save a lens file to an SxS memory card, insert
the card into a memory card slot and then proceed
as follows.
See “Basic Setup Menu Operations” (page 109) for
information about menu operations.
1
Select FILE >Lens in the setup menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step
2
.
For details, see “To assign names to files”
(page 161).
2
Select Lens Store Mem >Execute (if you
want to save the data in the camcorder’s
internal memory), and select Lens Store
SxS >Execute (if you want to save the
data on an SxS memory card).
3
Press the MENU knob.
If you select [Execute], a list box of lens file
number appears. File numbers where “No
File” is displayed are empty file numbers.
4
Select the file number under which you
want to save the data, and then press the
MENU knob.
A confirmation message appears.
5
To execute the save, select [Execute],
and then press the MENU knob.
To cancel the save, select [Cancel], and
then press the MENU knob.
If you selected Lens Store SxS >Execute in
step
2
, the ACCESS lamp lights (in blue on
the right-side panel and in orange in the card
slot section) when you execute the save.
When the data has been saved, a completion
message appears and the ACCESS lamp goes
out.
When using a USB flash drive (in UDF mode)
Connect a formatted USB flash drive
(see
page 73)
to the external device connector.
Select Lens Store USB >Execute in step
2
.
To load a lens file from an SxS memory card,
insert the SxS memory card into a memory card
slot, and then proceed as follows.
See “Basic Setup Menu Operations” (page 109) for
information about menu operations.
1
Select FILE >Lens in the setup menu.
2
Select Lens Recall Mem >Execute (if
you want to load the file from the
camcorder’s internal memory), and
select Lens Recall SxS >Execute (if you
want to load the file from an SxS
memory card).
3
Press the MENU knob.
If you select [Execute], a list box of lens files
appears. File numbers where “No File” is
displayed are empty file numbers.
Saving and Loading
Lens Files
Setting Lens File Data
Setting data Sub-items
V modulation shading
compensation values M V Modulation
Center marker position Lens Center H
Lens Center V
Flare level Lens R Flare
Lens G Flare
Lens B Flare
White balance
compensation value Lens W-R Offset
Lens W-B Offset
White shading
compensation value L R/G/B H Saw
L R/G/B H Para
L R/G/B V Saw
L R/G/B V Para
Saving Lens Files
Loading Lens Files