MPS-V500/V500P (U/C/CED/GA).3-856-662-11 (1).EN
For Y
our Infor
mation
Advanced Operations
Playing a Pictur
e MD
Recor
ding the print or
ders
39
(EN)
Meaning
There is no recording on the disc.
The inserted disc is not a Picture MD.
The inserted disc is damaged or does
not include recording/editing data.
There is no space left on the inserted
disc.
The number of orders being edited
reaches its maximum.
An operating problem has occurred.
The data file is erased or damaged.
The picture or audio data may not be
read.
The battery is discharged and the
recording cannot be made.
No disc is inserted.
No picture is recorded.
The number of orders reaches its
maximum.
The safety tab of the inserted disc is in
the write protection position.
Message
BLANK DISC
DATA DISC
DISC ERR
DISC FULL
EDIT FULL
ERROR
FILE ERR
LOW BATT
NO DISC
NO PICTURE
ORDER FULL
PROTECTED
Error messages
Countermeasure
Use another disc.
Use a formatted Picture MD or audio
MiniDisc.
Eject and reinsert the disc. If the
problem persists, use another disc.
Replace the disc with another.
“DISC FULL” may appear even when
the DISC bar on the OPTION screen
indicates a sufficient capacity remain-
ing on the MD. This means there are
many unrecorded fragments on the
MD that are too small to be used for
recording, due to repeated recording/
erasing cycles. Use another MD.
Press the EXEC/ROTATE key to record
the edited orders on the disc. (page 22)
Operate the unit again.
Eject and reinsert the disc. If the
problem persists, replace with
another disc.
Recharge the battery or replace it with
another one.
Insert a disc.
Insert a disc on which pictures are
recorded.
Erase unnecessary orders and perform
writing operation again.
Remove the disc, slide the safety tab
and re-insert.
(continued)
