Sony PFM-42B2, Руководство по эксплуатации

Страница: 78 / 294

26
(GB)
Watching the Picture
Preset input signals
Signal name
Color system or horizontal/
vertical frequency
Computer signals
1 VGA
a)
-1 (VGA 350) 31.5kHz 70.1Hz
2 640
×
350@85Hz (VESA b) STD) 37.9kHz 85.1Hz
3 640
×
400@85Hz (VESA STD) 37.9kHz 85.1Hz
4 640
×
480@60Hz (VESA STD) 31.5kHz 59.9Hz
5 Mac
c)
13" 35.0kHz 66.7Hz
6 640
×
480@72Hz (VESA STD) 37.9kHz 72.8Hz
7 640
×
480@75Hz (VESA STD) 37.5kHz 75.0Hz
8 640
×
480@85Hz (VESA STD) 43.3kHz 85.0Hz
9 852
×
480@60Hz (I·O DATA) d) 31.7kHz 60.0Hz
10 VGA (VGA TEXT) 31.5kHz 70.1Hz
11 720
×
400@85Hz (VESA STD) 37.9kHz 85.0Hz
12 800
×
600@56Hz (VESA STD) 35.2kHz 56.3Hz
13 800
×
600@60Hz (VESA STD) 37.9kHz 60.3Hz
14 800
×
600@72Hz (VESA STD) 48.1kHz 72.2Hz
15 800
×
600@75Hz (VESA STD) 46.9kHz 75.0Hz
16 800
×
600@85Hz (VESA STD) 53.7kHz 85.1Hz
17 Mac 16" 49.7kHz 74.6Hz
18 1024
×
768@60Hz (VESA STD) 48.4kHz 60.0Hz
19 1024
×
768@70Hz (VESA STD) 56.5kHz 70.1Hz
20 1024
×
768@75Hz (VESA STD) 60.0kHz 75.0Hz
21 1024
×
768@85Hz (VESA STD) 68.7kHz 85.0Hz
22 1152
×
864@75Hz (VESA STD) 67.5kHz 75.0Hz
23 Mac 21" 68.7kHz 75.1Hz
24 1280
×
960@60Hz (VESA STD) 60.0kHz 60.0Hz
25 1280
×
960@85Hz (VESA STD) 85.9kHz 85.0Hz
26 1280
×
1024@60Hz (VESA STD) 64.0kHz 60.0Hz
27 1280
×
1024@75Hz (VESA STD) 80.0kHz 75.0Hz
28 1280
×
1024@85Hz (VESA STD) 91.1kHz 85.0Hz
29 1600
×
1200@60Hz (VESA STD) 75.0kHz 60.0Hz
30 856
×
480@60Hz (Matrox)
e)
30.2kHz 60.0Hz
31 856
×
480@59.6Hz (Matrox) e) 30.1kHz 59.6Hz
32 856
×
480@60.1Hz (Matrox) e) 30.1kHz 60.1Hz
SDTV/HDTV
1 PAL PAL
2 NTSC NTSC
3 SECAM SECAM
4 NTSC4.43 NTSC/4.43
5 PAL60 PAL/60
6 PAL-M PAL-M
7 575/50i 575/50I
8 480/60i 480/60I
9 1080/24psf 1080/48I
10 1080/50i 1080/50I
11 576/50p 576/50P
12 480/60p 480/60P
13 1080/60i 1080/60I
14 720/60p 720/60P
a) VGA is a registered trademark of International Business
Machines Corporation, U.S.A.
b) VESA is a registered trademark of the Video Electronics
Standards Association.
c) Mac (Macintosh) is a registered trademark of Apple
Computer, Inc.
d) This item is only available when you use a graphic
accelerator board manufactured by I·O DATA DEVICE,
INC.
e) This item is only available when you use a graphics card
manufactured by Matrox Graphics Inc.
Notes
• When inputting an HDTV signal, input the tri-level
sync signal to the 2nd pin of the INPUT1 or INPUT2
(D-sub 15-pin) connector.
• When inputting a computer signal at the resolution
shown in item No. 29, set H SIZE, H SHIFT, V
SIZE and V SHIFT to the standard (00) and set
ZOOM to
×
1 in the PIC SIZE menu, or the picture
might oscillate.
• If the image color is too light after inputting the
DVD signal in the PFM-42B1/42B1E, adjust the
color in the “CHROMA” setting in the PIC
CONTROL menu.
In the PFM-42B2/42B2E, select “SMPTE” in YUV
LEVEL in the CONFIG menu.
• For 480/60p, input it using a YUV signal. If you
input an RGB signal, the system will determine the
frequency to be a VGA signal, it will display at
31.5kHz/59.9Hz, the screen phase will be off, and
compared to YUV input, the resolution will be
reduced. To address problems with screen phase, use
the H SHIFT and V SHIFT items on the Signal
Adjustment menu, or use the H SHIFT, V SHIFT
and SELECT buttons on the RM-42B Remote
Commander to make the necessary adjustments.
• When inputting a DTV signal (No.7 to No.14), input
it using a YUV signal.
Actual on-screen display of the unit’s status
On-screen display Significance
31.5kHz / 59.9Hz (e.g.) The selected input signal is
computer RGB.
480 / 60I (e.g.) The selected input signal is
component video.
NTSC (e.g.) The selected input signal is NTSC.
OTHERS The input signal is out of the
capture range.
NO SYNC There is no input signal.
INPUT1 RGB The signal mode of INPUT1 is set to
RGB.
INPUT1 YUV The signal mode of INPUT1 is set to
component video.
VIDEO COMPOSITE Composite video input is selected
for VIDEO.
VIDEO Y/C Y/C video input is selected for
VIDEO.