Using the setup wizard
The first time you start the Media Center, a setup wizard appears. Follow the steps in Media Center setup wizard to
properly activate and configure Media Center. The setup wizard tests your remote control, configures your Internet
connection and TV broadcast signal, and sets up the Television Program Guide for your local area.
Media Center - Getting Started
If you decide to skip any of the setup wizard steps, you can complete them later in the Settings window in Media
Center.
Check Remote Control —
The Media Center uses this interactive step to verify that the remote control is
communicating with the remote sensor. The LED on the remote control blinks when a button is pressed.
Media Center - Check Your Rem ote Control
Verify that your remote control has two AA batteries installed.
Set up Internet Connection
— The Media Center setup wizard uses an active Internet connection to set up and
update your local Television Program Guide. If you have already established an Internet connection, you are asked
to choose a download method. Select the appropriate download option, and follow the onscreen instructions.
Media Center - Download Method
Page 64
