Starting VAIO Media Console
VAIO Media Console software enables you to register and grant access to the client computers on your network. You can
also start and stop the servers that are installed on each client.
To configure client and server access
1.
Click
Start
in the Windows
®
taskbar, and then point to
All Programs
.
2.
Point to
VAIO Media
, point to
Server Administration
, and click
VAIO Media
Console
.
The VAIO Media Console software window appears, enabling you to:
Check the status of your servers
Troubleshoot problems
Start and stop one or more servers
See which devices are registered to the server.
To make additional content available to the network
After creating additional playlists, recorded TV programs, or other video content, you can make them available to client
computers on your network.
1.
Create or add new content (playlists, recorded TV programs, photos), using the appropriate software.
2.
Close VAIO Media software, if it is running.
3.
Refresh the VAIO Media software.
Information about the new content is updated when the server software starts again.
When you stop and restart the server, it displays new connections and refreshes the content on the network
computers.
Page 157